Moto Urban Pedal Manual

Motobicycles-36 UG
Berlin, Germany
www.motobicycles.com
info@motobicycles.com
Tel.: +49 (0) 30 / 6981 9089
Moto quality
Thank you for choosing the MOTO pedal. This manual has been
designed to assist you with technical support. Should you have
any questions please check this manual and if necessary contact
an experienced bicycle mechanic or the MOTO customer
support team.
The MOTO pedal is manufactured completely in Germany to
the highest quality requirements and assembled carefully by hand.
However, should you have reason to complain please contact
your bicycle dealer or the MOTO customer support team.
Contents
Allen key 3 mm 2 Stickers
Initial adjustments
1. Clean the crank
2. Dismount the current pedals
3. Clean the thread of the pedal crank arm thoroughly
Safety notes
Construction
2 Pedals
4 Grip tape pads
Screws
Urban Cycling Pedal
Manual
Please read this manual properly before use and follow all the
instructions carefully.
Once you have read the manual you should store it in a safe
place for future reference.
You should only disassemble the pedals if you are familiar with
the technology and if you have all the necessary tools at hand.
Nuts
Screws
Threaded
metal shaft
Screws
Nuts
Please tighten the screws of the plastic half-shells with a torque
of 120-150 Ncm. You can use the 3 mm Allen key, included in
the package.
Grip tape pad
Plastic
half-shell
Wooden frame
O-Ring
Plastic
half-shell
Grip tape pad