Advertisement
PRODUCT INSTALLATION IN EZ-HRA3
EZ-HRA3 base plate
STEP 1
Remove EZ-HRA3 base plate screws
and slide the base plate forward.
STEP 2
Mount EZ products, filler panels and
drawers to the base plate.
FILLER PANEL DETAIL: Mount an EZ-FP1 Filler Panel to the base plate.
DRAWER DETAIL: Insert the glide tabs into
the base plate slot(s).
STEP 3
Slide base plate back into the
EZ-HRA3 rack mount tray and secure
the base plate using the three screws.
EZ PRODUCT DETAIL: Mount an EZ product to the base plate.
EZ-HRA3 base plate bottom view
Base plate
screw holes
EZ-HRA3 tray
Product mounting screws
Base plate screws
Advertisement
