Page 1
Level indicators MAGTOP 801, 803, 806 WARNING Level indicator installation and using must be done outside from any magnetic field zone. Use non magnetic connection (Brass, Stainless Steel or plastic). Any iron device must be installed at 10 cm minimum distance fare. Ensure chemical compliance between liquid and level indicator.
Page 2
1. MOUNTING Verify tank flanges compatibility with MAGTOP flanges. Install level indicator on tank side. Do not forget to set seals (not furnished). It is highly suggested to set insulation valves, between tank and level indicator, in order to be able to remove the float in case of jamming. Insert the float by removing union 7.