Advertisement
Congratulations on your purchase, and thank you for selecting the RipTide™ brewing pump from
Blichmann Engineering™. We are confident that it will provide you years of service and many gallons
of outstanding beer. This manual will familiarize you with the use, assembly, and the sanitation
procedures for the product.
PLEASE READ AND THOROUGHLY UNDERSTAND THIS MANUAL PRIOR TO USE
About This Manual:
Warning:
Sections labeled "Warning" can lead to serious injury or death if not followed. Please
thoroughly read these sections and understand them completely before use. If you do not
understand them or have any questions, contact your retailer or Blichmann Engineering
(www.BlichmannEngineering.com) before use.
Caution:
Sections labeled "Caution" can lead to equipment damage or unsatisfactory performance of
the equipment. Please read these sections thoroughly. If you have any questions, contact your
retailer or Blichmann Engineering (www.BlichmannEngineering.com) before use.
Important:
Sections labeled "Important" should specifically be followed to ensure satisfactory results with
the product.
RipTide™ Owner's Manual – V4
Blichmann Engineering, LLC 2018
For replacement parts visit blichmannengineering.com/genuine-replacement-parts
RipTide
Brewing Pump
Assembly, Operation, & Maintenance
FOR IMPORTANT SAFETY INFORMATION!
™
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Blichmann RipTide
- Page 1 Congratulations on your purchase, and thank you for selecting the RipTide™ brewing pump from Blichmann Engineering™. We are confident that it will provide you years of service and many gallons of outstanding beer. This manual will familiarize you with the use, assembly, and the sanitation procedures for the product.
-
Page 2: Parts List
Assembly Your RipTide™ pump comes fully assembled. Prior to first use, disassemble the pump and soak the pump head parts in your favorite non-chlorine based cleaner. We recommend Five Star Chemical’s Powdered Brewery Wash (PBW) as a general cleaner for removing soils. Then soak in any non-chlorine based sanitizer. -
Page 3: Operation
Failure to comply with this caution will result in damage to the equipment and may void the warranty. RipTide™ Owner’s Manual – V4 Blichmann Engineering, LLC 2018... -
Page 4: After Use Cleaning And Storage
Note: If installing the RipTide™ to the Tower of Power™ LTE you will need to cut the cord of the RipTide™ to 3 Feet. Strip the outer cover 1.5” (40 mm) from the end to reveal 3 wires inside. Strip the green, white, and black wires 3/8”... -
Page 5: Blichmann Engineering Product Warranty
Blichmann Engineering warrants to the original purchaser that this product will be free from manufacturing defects in material and workmanship for a period of one (1) year from the date of purchase by the customer. Proof of purchase is required. Blichmann Engineering’s obligation to repair or replace defective materials or workmanship is the sole obligation of Blichmann Engineering...
Need help?
Do you have a question about the RipTide and is the answer not in the manual?
Questions and answers