Subaru H001SXC100 Installation Instructions Manual page 3

4
VEHICLE PREPARATION, continued
5. Using a 10mm socket/ratchet/extension, remove the two
(2) 10mm nuts securing the driver's side lower airbag/
knee bolster. (FIGURE E)
6. Remove the lower airbag/knee bolster. Using a pick tool,
disengage the yellow connector lock by lifting upward.
(FIGURE F)
Using a panel removal tool, carefully lift upward to
unplug the electrical connector and place the airbag/
knee bolster panel in a safe area.
7. Open the glove box and press inward on the sides of
the glove box to disengage the retaining tabs from the
glove box inner cover. Disconnect the strut from the
glove box. (FIGURE G)
PART NUMBER ISSUE
H001SXC100
DATE
- 10 Jan 2018
FIGURE E
FIGURE F
FIGURE G
SUBARU OF AMERICA
3 OF 12