Summary of Contents for Fohhn NA-3
- Page 1 USER MANUAL NET REMOTE NA-3 FOHHN-NET ETHERNET ADAPTER Please read this user manual through carefully before putting the system into operation and keep it for future reference.
- Page 2 Contents 1. Description 3 2. First Commissioning 4 3. Resetting and updating the NA-3 firmware via the FOHHN-NET Port 6 4. Contact Address 6...
- Page 3 1. Description The NA-3 is a FOHHN-NET ETHERNET ADAPTER for integrating FOHHN-NET devices into a local, Ethernet- based network. The devices can be controlled from a PC, located in the same LAN as the NA-3, using FOHHN AUDIO SOFT. Connections •...
- Page 4 192.168.1.99 Use an Ethernet cable for connecting the NA-3 to your PC, either directly or via a switch. If your computer receives no IP Address from a DHCP server, you must assign it a fixed IP Address in the same address range.
- Page 5 Also like every other device, the NA-3 uses a Fohhn-Net ID. Its factory setting is ID 1. Change the NA-3’s ID to one that no other FOHHN-NET device is using. After changing the FOHHN-NET ID, confirm the process with OK.
- Page 6 3. Resetting and updating the NA-3 firmware via the FOHHN-NET Port You can connect the NA-3 to an NA-11 USB adapter, via the FOHHN-NET Port, in order to configure it independently from the Ethernet. A firmware update is only possible via the FOHHN-NET Port.
Need help?
Do you have a question about the NA-3 and is the answer not in the manual?
Questions and answers