Summary of Contents for Petsafe Drinkwell PWW00-13708
Page 1
Quick Start Guide PWW00-13708 Drinkwell Multi-Tier Pet Fountain ® Please read this entire guide before beginning.
Page 2
Welcome You and your pet were made for each other. Our aim is to help you have the best companionship and the most memorable moments together. Your new Multi-Tier Pet Fountain is designed to entice your pet to stay hydrated and healthy.
Page 3
• Never wash the filter with soapy water as the soap residue will seep into the filter and cannot be removed. Only rinse the filter with water. • Use only PetSafe Brand authorized replacement filters. If unauthorized filters are used, the warranty may ®...
Page 4
In the Box Bowl Housing Housing Cap Carbon Filter Adaptor Pump +1 (800) 732-2677...
Page 5
1. Remove the housing by pushing in on both sides and lifting up. 2. On the backside of the lower bowl, remove the cord from the notch. 3. Remove the pump from the square indentation. 4. Pull the cord up through the hole. petsafe.com...
Page 6
5. Take the pump apart by first removing the faceplate. You may need to use a fingernail to pry it off. 6. Remove the teardrop shaped stator by pulling up on the small lip. Use a fingernail to pull out the impeller, which is held in place magnetically.
Page 7
NOTE: Do not place the adaptor or pump in the dishwasher. 6. Reassemble the pet fountain. Replacement Parts and Accessories Replacement parts and accessories for your fountain can be purchased by visiting www.petsafe.com or by contacting our Customer Care Center at 1-800-732-2677. PART DESCRIPTION...
Page 8
This Product has the benefit of a limited manufacturer’s warranty. Complete details of the warranty applicable to this Product and its terms can be found at petsafe.com and/or are available by contacting your local Customer Care Center: Radio Systems Corporation, 10427 PetSafe Way, Knoxville, TN 37932 USA...
Need help?
Do you have a question about the Drinkwell PWW00-13708 and is the answer not in the manual?
Questions and answers