Washing A Load Of Laundry; Overview Of The Control Panel - Samsung WF338 series User Manual

washing a load of laundry

OVERVIEW OF THE CONTROL PANEL

1 7 2
Digital graphic
1
display
Temperature
2
selection button
Spin selection
3
button
Steam Button
4
Soil Level
5
selection button
Signal selection
6
button
12_ Washing a load of laundry
WF338AA-02562A-01_EN.indd 12
3 4 5 6
Displays the remaining cycle time, all cycle information, and error messages.
Press the button repeatedly to cycle through the different water temperature options.
Extra Hot/Cold - Heavily soiled, colorfast items. Only available with the Sanitize cycle.
Hot/Cold - Whites and heavily soiled, colorfast items.
Warm/Warm - Colorfast items. When warm rinse is selected, only the final rinse will
be warm.
The other rinses will be cold to conserve energy.
Warm/Cold - Moderately soiled, colorfast items; most wrinkle-free items.
Cold/Cold - Brightly colored, very lightly soiled items.
Press the button repeatedly to cycle through the different spin speed options.
Extra High - Removes more water from loads during spin.
To minimize wrinkling of wrinkle-free and no-iron fabrics, DO NOT use
the Extra High spin option for these loads, nor overload your Washer.
High - Use for underwear, t-shirts, jeans and sturdy cottons.
Medium - Use for jeans, wrinkle-free or wash-and-wear items and synthetics.
Low - Use for delicate items needing a slow spin speed.
No Spin - Drains your Washer without spinning. Use for extremely delicate
items that cannot tolerate any spin.
Press the button to add steam to your laundry.
When steam is added, steam fills the inside of the washer, the door glass
mists up and the sound of steam is heard.
The door does not open during or after the steam operation if the internal
temperature is too high.
Steam is only available when a Steam cycle is selected.
Press the button to select the Soil Level/washing time.
Heavy - For heavily soiled loads.
Normal - For moderately soiled loads. This setting is best for most loads.
Light - For lightly soiled loads.
Press the button to increase or decrease the end of cycle signal volume or
turn off the signal.
7 8 9 10
2008-03-10 ¿ÀÈÄ 3:35:43