Table of Contents
Advertisement
•
Defender 100LDS™, anchored every second barrier at a maximum of 9.15m between
anchors with TAU-II End Terminals at each end with a minimum of 20 barriers between
terminals.
Figure 1.2 below shows the general arrangement of the Defender Barrier™ System before test
3-11.
Figure 1.2: Barrier Installation Setup for 3-11 LDS Crash Test
Delineation
1.2.
Barrier installations, whether they are permanent or temporary, may require delineation to be
attached for the duration of the installation. The type/shape/colour of this delineation will
vary dependant on the local regulatory requirements. Local regulations should be reviewed to
ensure correct delineation is attached to the Defender 100LDS™.
Defender 100LDS™ – Product Manual Version 1.4
Safe Barriers Pte Ltd
No modifications are to be made to the
skin of the barrier without prior approval
form the manufacturer.
6
Advertisement
Table of Contents
