Table of Contents
Advertisement
Juniper Advanced Threat Prevention Appliance
# wizard
Configuration Wizard Command Prompt Progressions
NOTE
Enter CTRL-C to exit the Configuration Wizard at any time. If you exit without completing the
configuration, you will be prompted again whether to run the Configuration Wizard.
You may also rerun the Configuration Wizard at any time with the CLI command wizard.
Configuration Wizard
Prompts
Use DHCP to obtain the IP
address and DNS server
address for the administrative
interface (Yes/No)?
Note: Only if your DHCP
response is no,enter the
following information when
prompted:
a. IP address
b. Netmask
c. Enter a gateway IP
address for this
management
(administrative) interface:
d. Enter primary DNS server
IP address.
e. Do you have a secondary
DNS Server (Yes/No).
f. Do you want to enter the
search domains?
g. Enter the search domain
(separate multiple search
domains by space):
Restart the administrative
interface (Yes/No)?
4
Customer Response
from All-in-One
We strongly discourage
the use of DHCP
addressing because it
changes dynamically.
A static IP address is
preferred.
Recommended:
Respond with no:
a. Enter an IP address
b. Enter a netmask
using the form
255.255.255.0.
c. Enter a gateway IP
address.
d. Enter the DNS server
IP address
e. If yes, enter the IP
address of the
secondary DNS server.
f. Enter yes if you want
DNS lookups to use a
specific domain.
g. Enter space
domain(s) separated
by spaces; for
example: example.com
lan.com dom2.com
Enter yes to restart
with the new
configuration settings
applied.
Copyright© 2018, Juniper Networks, Inc.
Customer Response
from Core or Mac Mini
We strongly discourage
the use of DHCP
addressing because it
changes dynamically.
A static IP address is
preferred.
Recommended:
Respond with no:
a. Enter an IP address
b. Enter a netmask
using the form
255.255.255.0.
c. Enter a gateway IP
address.
d. Enter the DNS server
IP address
e. If yes, enter the IP
address of the
secondary DNS server.
f. Enter yes if you want
DNS lookups to use a
specific domain.
g. Enter space
domain(s) separated
by spaces; for
example: example.com
lan.com dom2.com
Enter yes to restart
with the new
configuration settings
applied.
Customer Response
from Collector
We strongly discourage
the use of DHCP
addressing because it
changes dynamically.
A static IP address is
preferred.
Recommended:
Respond with no:
a. Enter an IP address
b. Enter a netmask
using the form
255.255.255.0.
c. Enter a gateway IP
address.
d. Enter the DNS server
IP address
e. If yes, enter the IP
address of the
secondary DNS server.
f. Enter yes if you want
DNS lookups to use a
specific domain.
g. Enter space
domain(s) separated
by spaces; for
example: example.com
lan.com dom2.com
Enter yes to restart
with the new
configuration settings
applied.
Advertisement
Table of Contents
