Hardware Maintenance Manual
Figure 8. Removal steps of fan assembly and Heat Sink assembly (continued)
Unplug the fan connector in the direction shown by arrow 2. Remove the
screw 3.
ideapad 330-14IKB
ideapad 330-15IKB/ideapad 330-15IKB Touch
When installing: Make sure that the connector is attached firmly.
Remove the fan in the direction shown by arrow 4. Be careful not to damage
the connector.
50
Step
Screw (quantity)
M2 × 6 mm, Phillips head, nylok-coated (1)
3
fan---mb---log up & fan---log up
c
b
c
b
Color
Black
Torque
1.85+/-0.15 kgf/
cm