Using the Configuration Menu (continued)
Advanced Setup>Access Point>Configuration>Security Settings
Wireless Band:
If the access point is an 11g device, IEEE 802.11g will be the only
choice here.
Authentication:
Select from one of the following:
n
Open System:
devices on the network. Open System is the default setting.
n
Shared Key:
in order to access the 11g WIRELESS LAN ACCESS POINT on the
network, the device must be listed in the Access Control List
n
Shared Key/Open System:
WEP:
Select Enabled or Disabled (the default setting is Disabled)
WEP Key Type:
Select HEX (Hexadecimal) or ASCII
Hexadecimal digits consist of the numbers 0-9 and the letters A-F ASCII (American
Standard Code for Information Interchange) is a code for representing English letters
as numbers from 0-127
WEP Key Size:
Select 64, 128 or 256 bit for 802.11b and 802.11g
Valid Key:
Select the key that you will use from one of the four keys in the Key Table.
Key Table:
Input up to 4 keys using the format that you have selected in Wep Key Type.
the 11g WIRELESS LAN ACCESS POINT will be visible to all
click here to select both options
18