Balzar Beskow S4 Assembly & Instruction Manual

ASSEMBLY INSTRUCTIONS
Unite
COMPOnentS
1 x 1 x
Plate
tabletop
1 x
Washer
1 x 1 x 3 x
Outer leg Countersunk
inner leg
screw
1 x 4 x 4 x Glider
Lower foot Screw (only for S4)
1 x 1 x 4 x
Upper foot Bolt Adjustable feet
M6 -> S4, M4
M8 -> L4, XL4
Required tools: hex key, crosshead
screwdriver, adjustable spanner.
www.balzar.se
Carefully slide the foot into the inner
1
leg.
Attach the mounting plate using a hex
4
key and 3 x Countersunk screw. the
small part sticking out on the outer leg
matches with a hole in the Plate.
Unite S4 Unite M4
Carefully slide the upper leg into the
2
inner leg. The upper foot fits into the
lower foot.
Put the tabletop on a protective
5
cover and attach it to the base using a
crosshead screwdriver and 4 x Screw.
Unite - L4 Unite - XL4
Slide the outer leg over the inner leg.
3
Secure using an adjustable spanner
and 1 x Bolt + 1 x Washer. tighten the
bolt so there is no movement in the
foot! Much force is needed!
Attach the 4 adjustable feet (A) OR the
6
4 gliders (B) and gently turn the table
upside down.
A
B