PART NUMBER: 51209
DO NOT INSTALL THIS PRODUCT ON ANY VEHICLE OTHER THAN THOSE LISTED ABOVE.
This product is only designed for the vehicles listed above. Failure to install this product on the proper vehicle could
cause injury to the vehicle occupants and damage to the product.
Note: Please read this manual thoroughly before beginning the installation. After completing
Tools You Will Need
[] A pencil
[] A Phillips head screwdriver
[] A hammer
[] A center punch
[] A 1/8" drill bit and a power drill
[] Safety Glasses
WINDSHIELD RETAINER KIT
Installation Instructions
CJ5, CJ7, 1986-1995 Wrangler,
Toyota FJ40 Landcruiser 1964-1984
installation, keep this manual for future reference.
Parts List and Hardware Identification
Windshield Retainer - Right,
Qty - 1, PN 225.42
Windshield Retainer - Left,
Qty - 1, PN 225.43
Because of Generic Packaging, extra parts may be included.
CAUTION: A loose windshield retainer may allow the top
to disengage from the windshield, causing damage to the
top and possible injury to the occupants of the vehicle.
Make certain that the windshield retainer is securely
fastened to the windshield at the time of first installation.
Check the tightness of the mounting screws every three
months. (Do not over-tighten.)
Safety Glasses should be worn at all times while installing
this product.
Check off each item
#8 x 1/2" Pan Head
Washer Screw - Black,
Qty - 13, PN 200.48
51209
1