Write Text - Nokia E52 User Manual

Your push to talk connection is in do not disturb
mode, because the ringing type of your device is set
to Beep once or Silent, or you have an incoming or
ongoing phone call. In this mode, you cannot make
PTT calls.

Write text

The input methods provided in the device may vary according
to different sales markets.
Traditional text input
indicates traditional text input.
and indicate the uppercase and lowercase.
indicates the sentence case, that is, the first letter of
the sentence is written in uppercase and all the other letters
are automatically written in lowercase.
number mode.
To write text with the keypad, press a number key, 2-9,
repeatedly until the desired character is displayed. There are
more characters available for a number key than are printed
on the key. If the next letter is located on the same key as the
present one, wait until the cursor is displayed, and enter the
letter.
To insert a number, press and hold the number key.
To switch between the different character cases and modes,
press #.
www.nokia.com/support
Cyan Cyan
To erase a character, press the backspace key. Press and hold
the backspace key to erase more than one character.
To enter the most common punctuation marks, press 1
repeatedly until the desired punctuation mark is displayed.
To add special characters, press and hold *.
To insert a space, press 0. To insert a line break, press 0 three
times.
Predictive text input
With predictive input, you can enter any letter with a single
keypress. Predictive text input is based on a built-in
dictionary.
To activate or deactivate predictive text input, select
Options Input options. The indicator
>
When you start writing a word, your device suggests possible
words. When the correct word is found, press the space key
(0) to confirm it and to add a space. While writing, you can
indicates
scroll down to access a list of suggested words. If the desired
word is on the list, select the word. If the ? character is
displayed after the word, the word you intended to write is
not in the dictionary. To add a word to the dictionary, select
Spell, enter the word using traditional text input, and select
OK. When the dictionary is full, the new word replaces the
oldest added word.
To deactivate automatic word completion, select
Input options > Settings.
To change the writing language, select
options Writing language.
>
Magenta Magenta Yellow Yellow Black Black
is displayed.
Options
>
Options Input
>