TP-Link HA100 Quick Start Manual

Play Music on Another Smart Device
1. On the currently paired device, end the connection by:
Disabling Bluetooth or disconnecting TP-Link_Music, or
Placing its back against the NFC Tag or Music Receiver (only for NFC-enabled
Android devices)
2. On another device, pair to the Music Receiver, then play and enjoy music!
Bonus Tips
After pairing a second device, you can restore connection of the former device to
enjoy music from them in turns. Simply pause music on one device and play on the
other one.
Note that audio may delay when switching from an iOS device.
FAQ
Q1. Why can't I pair the Music Receiver?
A. The Music Receiver is ready to be paired only when its LED turns white. Check the LED.
If it is o , re-plug the power cable or try another power outlet.
If it is blue, check your other paired devices and end the connection.
Q2. What can I do if my music does not come out from my stereo?
A1. Make sure your smart device and the Music Receiver are successfully connected, within 20
meters (66 feet) of each other, and within a direct line of sight. The Music Receiver will be
disconnected if your device's Bluetooth signal is blocked, interfered, or out of range for
longer than 5 minutes.
A2. Make sure your stereo and the Music Receiver are correctly connected via one of the
provided audio cables, and both are powered on.
A3. Make sure the volume on your music player and stereo are at an audible level.
For more information, please visit:
www.tp-link.com
Technical Support
Tel: +86 755 2650 4400
E-mail: support@tp-link.com
Web: http://www.tp-link.com/support ©2017 TP-Link 7106507772 REV2.0.2
HA100 Quick Start Guide
NFC-Enabled
Bluetooth Music Receiver
Bringing Bluetooth to your home stereo