Summary of Contents for Landingear LegUp Generation II
Page 1
Installation Manual Generation II Harley Cush Drive Mount Rev II Copyright 2016, Pete Giarrusso, Inc. D/B/A Chopper Design Services All Rights Reserved...
Page 2
MOUNT PROXIMITY SWITCH This manual covers the installation of the Rev II Speed sensor bracket for Harley Cush Drive Models. Start by removing the existing bracket, and peeling the sensor off the old mount. You may wish to cut the wire ties that hold the sensor wire so you have more leeway for the new bracket.
Page 3
When you think you have it, turn the ignition to Accessory position, and roll the wheel to make the spokes of the rotor pass by the sensor. Each time one passes the sensor, the LED on the sensor should go bright then off.