Setting The Vcr Unit To Record A Programme Automatically - Samsung Colour TV/VCR Owner's Instructions Manual

V.MENU
DISPLAY
VCR MENU
RECORD PROGRAMME
REPEAT
PICTURE
TAPE SELECT
V.SYSTEM
ADJUST
GB
PR. START
-- --:--
-- --:--
-- --:--
-- --:--
-- --:--
-- --:--
X:CLEAR
ADJUST
15:07 06/04/00 THU
PR.
START
STOP
DATE
MODE
DECODER
SPEED
PDC
ADJUST
Setting the VCR Unit to Record ...
MUTE
P
MENU
P
P.STD
: OFF
: NORMAL
: E180/T120
: AUTO
SELECT EXIT
STOP DATE
--:-- --/--
--:-- --/--
--:-- --/--
--:-- --/--
--:-- --/--
--:-- --/--
EXIT
SELECT
: 01
: 16:50
: 18:30
: 08/04 SAT
: ONCE
: ON
: SP
: OFF
SELECT EXIT
32
This function enables you to preset the VCR unit to record a
programme up to one month before that programme is to be
broadcast. Up to six programmes can be preset.
You must provide the following information on the broadcast to be
recorded:
Programme number
Recording speed (LP option)
Start time
End time
Date
Recording mode (once, daily, weekly)
Optional use of a decoder
Before presetting your VCR:
Check that the language, date and time are correct (if
the clock has not been set, the Date/Time Setting
function is activated automatically)
Insert the cassette on which the programme is to be
recorded (safety tab intact)
1
Press V.MENU ( ).
Result: The VCR menu is displayed.
2
Select the RECORD PROGRAMME option by pressing the + button.
Result: The list of preset recordings is displayed.
3
Select a line that is free (no recording set) by pressing the P
buttons one or more times.
4
Press the + button to confirm your selection.
Result: The list of information to be entered for the recording is
displayed with preset values.
5
Enter the channel number by pressing the appropriate numeric buttons or
press INPUT ( ) to select the AV input.
6
Specify the start time by pressing the appropriate numeric buttons. When
you are satisfied, press the P
When entering the date and time, all single digits must be preceded
by a zero.
Example: 7:30 am
Enter 07:30
If an invalid number is entered, the previous value is redisplayed.
Enter the information again. If you make a mistake, press the
- button several times to move backwards until the incorrect digit is
cleared and then enter the correct number.
button.
or