Samsung WS-32Z308P Owner's Instructions Manual page 14

Storing Channels Automatically
TV Channel
Auto Store
Manual Store
Add/Delete
Sort
Name
† †
More
œ œ √ √
Move Enter
TV Auto Store
œ œ Belgium
Country
Search : -/+
œ œ √ √
Move Adjust
TV Auto Store
Country : Belgium
œ œ -/+
Search
œ œ √ √
Move Search
P 1 C-- -----
7 %
106 MHz
Return
TV Sort
œ œ P 1 -----
From
To : P-- -----
Store : ?
œ œ √ √
Move Adjust
English - 14
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
√ √
clear any channels you do not wish to watch.
√ √
√ √
√ √
√ √
1
Press the MENU (
Result:
Return
Press the ▲ or ▼ button to select Channel.
2
Result:
√ √
Press the œ or √ button.
3
Result:
Press the œ or √ button again.
4
Result:
Return
Select your country by pressing the œ or √ button. The countries
5
are displayed in the following order:
Belgium - France - Germany - Italy - Nederlands - Spain -
Sweden - Switzerland - Unitde Kingdom - Others -
√ √
Eastren Europe
Press the ▲ or ▼ button to select Search.
6
Press the œ or √ button to start the search.
7
Return
Result:
➢
8
When searching and storing are complete, the Sort menu is
displayed.
◆ To sort the stored channels into the desired numerical order,
◆ To exit from the channel store function without sorting the
√ √
9
When the channels have been stored, you can:
◆ Sort them in the order required (refer to page 15)
◆ Clear a channel (refer to page 18)
Return
◆ Assign a name to the stored channels (refer to page 19)
◆ Fine tune channel reception if necessary (refer to page 20)
◆ Activate the Digital Noise Reduction feature (refer to page 24)
) button.
The main menu is displayed.
The options available in the Channel group are
displayed.
The Auto Store is selected.
The options available in the Auto Store group are
displayed with Country is selected.
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
To stop the search before it has finished, press the MENU
( ) button.
go to Step 6 of the "Sorting the Stored Channels" procedure
on page 15.
channels, press the MENU (
menus disappear.
) button repeatedly until the