Table of Contents
Advertisement
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power
levels so as to use only the power required to reach
the network. In general, the closer you are to a
wireless base station antenna, the lower the power
output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the exposure limit
established by the FCC. Tests for each model phone
are performed in positions and locations (e.g. at the
ear and worn on the body) as required by the FCC.
The highest SAR values for this model phone as
reported to the FCC are:
GSM 850 Mode
•
Head: 0.113 W/Kg.
•
Body-worn: 0.275 W/Kg.
GSM 1900 Mode(Part 24)
•
Head: 0.470 W/Kg.
•
Body-worn: 0.539 W/Kg.
For body worn operation, this model phone
has been tested and meets the FCC RF exposure
guidelines whenused with a Samsung accessory
designated for this product or when used with an
accessory that contains no metal and that positions
the handset a minimum of 1.5 cm from the body.
Non-compliance with the above restrictions may
result in violation of FCC RF exposure guidelines.
9
Advertisement
Table of Contents
