1. Manuals
  2. Brands
  3. Littfinski Daten Technik Manuals
  4. Media Converter
  5. TurnTable-Decoder
  6. Operation instruction manual

Littfinski Daten Technik TurnTable-Decoder Operation Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Littfinski DatenTechnik (LDT)
Kleiner Ring 9 • D-25492 Heist/Germany • Phone: 0049 4122 / 977 381 • Fax: 0049 4122 / 977 382
Operation Instruction
TurnTable-Decoder
from the Digital-Professional-Series !
TT-DEC-G Part-No.: 010503
>> finished module in a case <<
IC3
Z805
Digital-Profi werden!
Drehscheiben-Decoder
TT-DEC
Für Fleischmann-Drehscheiben 6052, 6152, 6154,
6651, 9152, 6680 (mit und ohne "C"), 6652 (mit
3-Leiter Gleis), Roco 35900 und Märklin 7286.
Multi-Digital
16...18V~
G COM R
red brown
K
J
TT-DEC
This product is not a toy! Not suitable for children under 14 years of age! The kit contains small parts, which should
be kept away from children under 3! Improper use will imply danger of injuring due to sharp edges and tips! Please
store this instruction carefully.
Multi-Digital
TT-DEC
3
2
1
JP1
IC4
LM317
(DCC und Märklin-Motorola)
Littfinski DatenTechnik (LDT)
D-25492 Heist
www.ldt-infocenter.com
1
ST4
LED1
LED2
LED3
grey yellow red brown
+
+
Rev. 1.3
green yellow red
Suitable
turntables
6651, 9152, 6680 (each with and
without "C") and 6652 (with 3-rail
conductor), the Roco turntable
35900, as well as for the Märklin
turntable 7286.
For the data formats Märklin
Motorola and DCC.
Compatible commands for the
Märklin
7686.
+
A
Rückmeldg.
Feedback
for
Fleischmann
6052,
6152,
6154,
turntable
electronic

Advertisement

Table of Contents
loading

Summary of Contents for Littfinski Daten Technik TurnTable-Decoder

  • Page 1 Littfinski DatenTechnik (LDT) Kleiner Ring 9 • D-25492 Heist/Germany • Phone: 0049 4122 / 977 381 • Fax: 0049 4122 / 977 382 Operation Instruction TurnTable-Decoder TT-DEC from the Digital-Professional-Series ! TT-DEC-G Part-No.: 010503 >> finished module in a case <<...

  • Page 2: Table Of Contents

    Many illustrations at this manual are identified with a file name (e.g. page_526). You can find those files on our Web-Site at the section “Sample Connections” of the Turntable-Decoder TT-DEC. You can download the files as PDF-File and make a colored print at the DIN A4 format.

  • Page 3: Selecting The Available Turntable

    6152, 6651, 6652 und 9152 – each with and without “C”) please insert a jumper as shown below under 2.2. If you want to use the TurnTable-Decoder TT-DEC together with the Märklin turntable 7286 please insert a jumper as described under 2.1.

  • Page 4: Connecting The Tt-Dec To The Digital Layout And To The Turntable

    (switch-off all transformers or un-plug the main plug). 3.1. Connecting the TT-DEC to the digital layout: The TurnTable-Decoder TT-DEC receives the power supply via the two clamps at the very left side of the 11-poles connection clamp. The voltage can be between 16 and 18 Volt~ (alternated voltage of a model railway transformer).
  • Page 5 TT-DEC – Manual 3.2. Connecting the TT-DEC to a Fleischmann turntable 6052, 6152, 6154, 6651, 6652, 9152 or 6680 (each with and without “C”) and Roco turntable 35900: All Fleischmann turntables and the Roco turntable 35900 contain a 5-poles flat ribbon cable.
  • Page 6 TT-DEC – Manual Fleischmann turntable equipped Z805 LM317 with a motor from Digital-Profi werden! Drehscheiben-Decoder sb modellbau you TT-DEC (DCC und Märklin-Motorola) Für Fleischmann-Drehscheiben 6052, 6152, 6154, have to connect 6651, 9152, 6680 (mit und ohne "C"), 6652 (mit 3-Leiter Gleis), Roco 35900 und Märklin 7286. Littfinski DatenTechnik (LDT) D-25492 Heist TurnTable-...

  • Page 7: Programming The Turntable-Decoder Tt-Dec

    For the first start please take care that you follow exact the sequences of the programming as described below. 4.1. Programming of the basic address and the data format: The TurnTable-Decoder TT-DEC will be controlled by accessory addresses (turnout addresses) which will be used as well for switching of turnouts or signals.
  • Page 8 TT-DEC – Manual The command structure of the TT-DEC is compatible to the commands of the Märklin turntable-decoder 7686. It does not matter if you actual want to digital control a Märklin- or a Fleischmann turntable. The indication of the data format for the control of the TurnTable-Decoder TT-DEC from the command station (Märklin-Motorola or DCC) is not required.

  • Page 9: Adjusting The Turntable Bridge Speed And The Cycle Frequency

    4.2. Adjusting the turntable bridge-speed and the cycle-frequency: Because every turntable contains different mechanical and electrical characteristics is it required to adjust a safe and realistic operation via the TurnTable-Decoder TT- DEC with two potentiometer. The factory setting of both potentiometers is in middle position the arrow of the setting slit shows to the top (12:00 o`clock).

  • Page 10: Programming Track Connections

    180 degree by each >Turn< command in both turning directions before starting with the programming of the track connections. By programming the track connections you should prepare your TurnTable-Decoder TT-DEC to be able to recognize all available track connections and turn the turntable bridge to the required track connection during the operation.
  • Page 11 TT-DEC – Manual Programming Sample According to the programming sequence item 3 the turntable has been turned into the reference position. The bridge will be situated in level with the little housing on the left side. With the command >Clear< the position of track 1 (reference track) will be stored (programming sequence item 4).

  • Page 12: Change The Bridge Track Polarity On Fleischmann And Roco Turntables

    The TurnTable-Decoder TT-DEC is able to change the polarity of the bridge rail. For this purpose will be the TurnTable-Decoder combined with a permanent power switch unit (DauerStromUmschalter) DSU.
  • Page 13 This can be done by the TurnTable-Decoder TT-DEC via the permanent power switch unit DSU if it knows the parting line.

  • Page 14: Synchronizing The Reference Track

    TT-DEC – Manual the adjustments will be carried out via your model railway software or via your command station with turntable indication. 3. Send the command >Drehrichtung< (turning direction) clockwise or anti clockwise. The position of changing the polarity will be stored and the programming mode will be closed.

  • Page 15: Programming- And Control-Table

    TT-DEC – Manual 4.7. Programming- and Control-table: page_545...

  • Page 16: Feedback Reports

    TT-DEC – Manual 5. Feedback reports: The Turntable-Decoder TT-DEC is able to send the information “position reached” and “bridge track occupied” to the feedback modules. Those feedback information can be used by a digital command station or a model railway software for further automatic control operation of the turntable.
  • Page 17 TT-DEC – Manual 5.1.2. Position reached and bridge track occupied with Optocoupling-Feedback Module RM-88-N-O for the s88-Feedback bus: Diode 1N4003 Bestellbezeichnung: 1N4003 Z805 LM317 Diode 1N4003 Order code: 1N4003 Digital-Profi werden! Digital-Profi werden! Drehscheiben-Decoder Rückmeldemodul TT-DEC RM-88-N-Opto (DCC und Märklin-Motorola) Für Fleischmann-Drehscheiben 6052, 6152, 6154, 16 galvanisch getrennte Rückmeldeeingänge 6651, 9152, 6680 (mit und ohne "C"), 6652 (mit...
  • Page 18 TT-DEC – Manual 5.2.2 Position reached and bridge rail occupied with RS-8 for the RS-Feedback bus: Widerstand 1,5KOhm /0,6W Diode 1N4003 Überwachte Bereiche im Bestellbezeichnung: Res1K5 Bestellbezeichnung: 1N4003 Umfeld der Drehscheibe Resistor 1,5KOhm /0,6W Diode 1N4003 monitored areas within turntable Order code: Res1K5 Order code: 1N4003 Z805...
  • Page 19 TT-DEC – Manual 5.2.4. Position reached and bridge rail occupied with Uhlenbrock 63 340 for the LocoNet: Widerstand 1,5KOhm /0,6W Diode 1N4003 Überwachte Bereiche im Bestellbezeichnung: Res1K5 Bestellbezeichnung: 1N4003 Umfeld der Drehscheibe Resistor 1,5KOhm /0,6W Diode 1N4003 monitored areas within turntable Order code: Res1K5 Order code: 1N4003 Z805...

  • Page 20: Assembly Plan

    TT-DEC – Manual 6. Assembly plan: Made in Europe by Littfinski DatenTechnik (LDT) Kleiner Ring 9 D-25492 Heist/Germany Phone: 0049 4122 / 977 381 Fax: 0049 4122 / 977 382 Internet: http://www.ldt-infocenter.com Subject to technical changes and errors. © 09/2017 by LDT Märklin and Motorola and Fleischmann are registered trademarks.

Table of Contents