Notes On Copyrights; Regional Code; About The Remote Control; Selecting The Viewing Source - LG V9720CMZ Owner's Manual

Notes on Copyrights:

It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyright-
ed material without permission. This product features
the copy protection function developed by
Macrovision. Copy protection signals are recorded on
some discs. When recording and playing the pictures
of these discs picture noise will appear. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be
authorized by Macrovision Corporation, and is intend-
ed for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS ECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO THE
'STANDARD DEFINITION' OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATI-
BILITY WITH THIS MODEL 525p DVD PLAYER,
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.

Regional code

This DVD+VCR is designed and
manufactured for playback of
region "1" encoded DVD soft-
ware. This unit can play only DVD
discs labeled "1" or "ALL".
Notes on Regional Codes
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your DVD+VCR's regional
code or the disc cannot play.
• If you try to play a DVD with a different region
code from your player, the message "Check
Regional Code" appears on the TV screen.

About the Remote Control

Operation Range
Point the remote control at the remote sensor and
press the buttons.
Distance: About 23 ft (7 m) from the front of the
Angle:
Battery installation
Do not mix old and new batteries and never
mix different types of batteries such as stan-
dard, alkaline, etc.

Selecting the Viewing Source

You must select one of your output sources
(DVD or VCR) to view on the TV screen.
• If you want to view DVD deck output source:
Press DVD until DVD indicator in the display window
lights and output source of DVD deck is viewed on the TV
screen.
• If you want to view VCR deck output source:
Press VCR until VCR indicator in the display window
lights and output source of VCR deck is viewed on the TV
screen.
1 ALL
Notes:
If you insert a disc while the DVD+VCR is in the VCR
•
mode, the DVD+VCR will switch to DVD mode automati-
cally.
If you insert a cassette tape without prevention tab while
•
the DVD+VCR is in the DVD mode, the DVD+VCR will
switch to VCR mode automatically.
Manufactured under license from Dolby
Laboratories. "Dolby", "Pro Logic", and the
double-D symbol are trademarks of Dolby
Laboratories.
DTS and DTS Digital Out are trademarks of
Digital Theater Systems, Inc.
remote sensor.
About 30° in each direction of the front of the
remote sensor.
Detach the battery cover on the rear of
the remote control, and insert two
(R03/AAA) size batteries with
aligned correctly.
and
7