Belkin F5D7051 User Manual page 19

F5D7051 Manual_20071012 Page 19 of 32
For instance:
AF 0F 4B C3 D4 = 64-bit WEP key
(Designer please use chart found on P74845uk page 28)
3. Click "Apply Changes" to finish. Encryption in the Wireless Router (or Access
Point) is now set. Each of your computers on your wireless network will now
need to be configured with the same security settings.
WARNING: If you are using a wireless client to turn on the security settings in
your Wireless Router (or Access Point), you will temporarily lose your wireless
connection until you activate security on your wireless client.
128-Bit WEP Encryption
1. Select "128-bit WEP" from the drop-down menu.
2. After selecting your WEP encryption mode, you can enter your key manually
by typing in the hex key manually, or you can type in a passphrase in the
"Passphrase" field and click "Generate" to create a key.
A hex (hexadecimal) key is a combination of numbers and letters from A–F and
0–9. For 128-bit WEP, you need to enter 26 hex keys.
For instance:
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key
3. Click "Apply Changes" to finish. Encryption in the Wireless Router (or Access
Point) is now set. Each of the computers on your wireless network will now need
to be configured with the same security settings.
WARNING: If you are using a wireless client to turn on the security settings in
your Wireless Router (or Access Point), you will temporarily lose your wireless
connection until you activate security on your wireless client.
WPA-PSK (no server)
Choose this setting if your network does not use a radius server. WPA-PSK (no
server) is typically used in home and small office networking.
1. From the "Security Mode" drop-down menu, select "WPA-PSK (no server)".
2. Enter your network key. This can be from eight to 63 characters and can be
letters, numbers, or symbols. This same key must be used on all of the clients
(network cards) that you want to include in your network.
3. Click "Apply Changes" to finish. You must now set all clients (network cards
and adapters) to match these settings.