Window Master WEA 102 Installation Instructions Manual

WEA 102
KNX - Power supply
Installation instruction: Please read the manual carefully before installment. The manual should be kept.
Table of content:
1.

Technical data

2. Declaration of conformity
3. Placement and functions of LEDs and switches
4. Mounting and connection
1.Technical data
Size
Input voltage
Power consumption
Output voltage
Output current
Buffer time
Connection
Input (net)
Output (bus)
Output voltage
(unthrottlet)
Protection type
EMC-requirements
Surrounding Working
conditions
Storage
www.WindowMaster.com
WindowMaster A/S Skelstedet 13 2950 Vedbæk Danmark Tel.: +45 4567 0300 Fax: +45 4567 0390
WindowMaster GmbH Zum Bache 4 32549 Bad Oeynhausen Deutschland Tel.: +49 (0) 5731-7583-0 Fax: +49 (0) 5731-7583-79
WindowMaster Control Systems Ltd. UNIT 21 Port Tunnel Business Park Dublin 17 Ireland Tel: +353 (0) 1894 1444 Fax: +44 (0) 1536 526321
WindowMaster AG Industriestrasse 7 4632 Trimbach Schweiz Tel.: +41 (0) 62 289 22 22 Fax: +41 (0) 62 289 22 20
WindowMaster Control Systems Ltd. Kettering Parkway Wellingborough Road Kettering Northants NN15 6XR United Kingdom Tel.: +44 (0) 1536 510990 Fax: +44 (0) 1536 526321
WEA 102 install 0510-UK ©WindowMaster 2009,2010 ®WindowMaster is a registered trademark used under license by WindowMaster Group
4 DIN-rail modules of 18mm
120-230 VAC, 50 / 60Hz, allowed range 102-253 VAC
approx 24VA (nominal)
29 VDC (nominal value), allowed range 28-30 VDC, low current (SELV)
640 mA (nominal value), short circuit current limited to 1,5 A
by power failure of the engagement voltage approx 200ms by nominal load
plug-in terminals
- 0,5...3,3mm² (AWG 12) onewired, stripping length 9-10mm
spring contact on data rail
bus terminal (black-red), plug-in terminals, 0,6...0,8mm² onewired
bus terminal (yellow-white), plug-in terminals, 0,6...0,8mm² onewired
IP 20
EN 50090-2-2
Working temperature -5 - +45°C
Rel. humidity 5% - 93% (non condensation)
Storage temperature -25 - +70°C
rel. Humidity 5% - 93% (non condensation)
1