Arlec PL819 Installation Instructions

Warranty
Arlec guarantees this product in accordance with the Australian Consumer Law.
Arlec also warrants to the original first purchaser of this product ("you") from a retailer that this product will be free of defects in materials and workmanship
for a period of 12 months from the date of purchase; provided the product is not used other than for the purpose, or in a manner not within the scope of the
recommendations and limitations, specified by Arlec, is new and not damaged at the time of purchase, has not been subjected to abuse, misuse, neglect or
damage, has not been modified or repaired without the approval of Arlec and has not been used for commercial purposes ("Warranty").
If you wish to claim on the Warranty, you must, at your own expense, return the product, and provide proof of original purchase and your name,
address and telephone number, to Arlec at the address below or the retailer from whom you originally purchased the product within 12 months from
the date of purchase.
Arlec will (or authorise the retailer to) assess any claim you may make on the Warranty in the above manner and if, in Arlec's reasonable opinion, the
Warranty applies, Arlec will at its own option and expense (or authorise the retailer to) replace the product with the same or similar product or repair the
product and return it to you or refund the price you paid for the product. Arlec will bear its own expenses of doing those things, and you must bear any other
expenses of claiming on the Warranty.
The Warranty is in addition to other rights and remedies you may have under a law in relation to the product to which the Warranty relates.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods
fail to be of acceptable quality and the failure does not amount to a major failure.
Arlec Australia Pty. ltd. AcN 009 322 105 ("Arlec") gives the Warranty.
Arlec's telephone number, address and email address are:
customer service: (03) 9982 5111
Building 3, 31 – 41 Joseph Street, Blackburn North, Victoria, 3130
Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130
Email: custservice@arlec.com.au
© This instruction leaflet is subject to copyright and must not be reproduced, copied or otherwise used in any way or for
any purpose without the consent in writing of the owner, Arlec Australia Pty Ltd (A.C.N. 009 322 105).
PL819_CPIN002680.indd 1-2
10
BRIGHT
LED
TECHNOLOGY
Multi Coloured
LED Party Light Set

INsTAllATION INsTRucTIONs

IMPORTANT!
Please read these instructions carefully.
Keep these instructions in a safe place for
future reference.
The Arlec party light set is a low voltage
light kit suitable for indoor or outdoor use.
This light kit is ideal for decorating walls,
verandas, fences or rooftops during the
festive season. The low voltage transformer
and LED lights means it is safer and more
cost effective to run the lights for longer
duration.
The Transformer
The transformer reduces the mains voltage
from 240V down to a safe low operating
voltage. The transformer is not of weather
resistant construction and can only be
housed indoors. The kit is supplied with
suitable length wire to allow use of the
lights outdoors while the transformer
remains inside under shelter.
WARNING. ALWAYS UNWIND CORD BEFORE USE
CPIN002680
CPIN002680
PL819
Transformer & Kit Precautions
• Always use the transformer supplied with
the kit to operate it - check the labelling
on the light chain and transformer to see
that they correspond.
• The transformer is sized appropriately to
the loading of the lights, and use of an
incorrect transformer can damage the
transformer or the lights.
• DO NOT attempt to modify the wiring in
the light chain or 'cut to length'.
• DO NOT try to run more than one kit
off a transformer or try to electrically
interconnect two or more transformers.
• The transformer will run warm to touch,
always keep it in a ventilated position; do
not cover it with carpet, soft furnishings,
etc.
• Keep transformers and 240 volt wiring at
least 4 metres away from a pool or spa.
• Avoid using 'stacked' double adapters;
use a power board instead to plug in
several kits.
• If you use an extension cord, use one the
right length for the purpose.
DO NOT chain several extension cords.
• Always ensure the extension cord
connections and power boards are not in
wet areas.
5/07/13 4:19 PM