Please note that this product, as all the others in the rich HERA range, has been designed and made with total quality to ensure excellent performance and best meet your
expectations and requirements. Carefully read this instruction manual in its entirety and keep it safe for future reference. It is essential to know the information and comply
with the instructions given in this manual to ensure the fitting is installed, used and serviced correctly and safely. HERA disclaims all liability for damage to the fitting or to
other property or persons deriving from installation, use and maintenance that have not been carried out in conformity with this instruction manual, which must always
accompany the fitting. HERA reserves the right to modify the characteristics stated in this instruction manual at any time and without prior notice.
Page 1
We thank you for your custom. Please note that this product, as all the others in the rich HERA range, has been designed and made with total quality to ensure excellent performance and best meet your expectations and requirements. Carefully read this instruction manual in its entirety and keep it safe for future reference. It is essential to know the information and comply with the instructions given in this manual to ensure the fitting is installed, used and serviced correctly and safely.
Waste Electrical Shock Manual. and Electronic Equipment Warranty Hera warrants the products for a period of five (5) years from date of purchase, provided that the purchased items are used under the conditions stated in this user manual. Marking www.heraled.com...
Page 3
• Energy is transmitted by 90 ~ 264VAC 50/60HZ Universal AC input 3-Pin VDE connector • Energy output of products is Power Pack 320 48V / 320W / 6.7A, Power Pack 1000 48V / 1000W / 21A, Power Pack 2000 48V / 2000W / 42A.
POWER PACK SERIES Producck Product Specifications Model Power Pack 320 Power Pack 1000 Power Pack 2000 Power Input: 90 ~ 264VAC 50/60Hz Universal AC input Power Connections: Neutrik® powerCon 20A Neutrik® powerCon 20A AC Input 3-Pin VDE Control Interface: USITT DMX 512 A Interface Connections: Neutrik®...
POWER PACK SERIES Indoor Zone Power Pack 320 POWER PACK 320 PIN DETAILS DMX IN DMX & POWER OUT 1 GND 2 DMX - 3 DMX + 4 NC 5 NC 90~264VAC 50/60Hz 90~264VAC 50/60Hz 90~264VAC 50/60Hz DMX SIGNAL RISK OF...
Page 6
POWER PACK SERIES Power Pack 1000 / 2000 90~264VAC 50/60Hz DMX SIGNAL RISK OF ELECTRIC SHOCK 5 Pole Female XLR Connector Neutrik® powerCon 20A Power Pack 1000 125W Per Port 4 Pin Female Power Pack 2000 250W Per Port Connector 4 Pin Male Connector POWER PACK 1000 / 2000 PIN DETAILS...
POWER PACK SERIES Product Table for Power Pack 320 32 pcs. X2 Port 22 pcs. Power Pack 320 48V / 320W / 6.7A 160W Per Port 5 Pin IP 67 Connector 2 x Full Isolated Splitted or By-pass 32 pcs.
Page 8
POWER PACK SERIES POWER PACK SERIES Product Table for Power Pack 1000 29 pcs. Sword® RGB Series 300mm Sword® RGB Series 600mm 14 pcs. 9 pcs. Sword® RGB Series 900mm 7 pcs. Sword® RGB Series 1200mm 5 pcs. Sword® RGB Series 1500mm 21 pcs.
Page 9
POWER PACK SERIES Product Table for Power Pack 2000 32 pcs. Sword® RGB Series 300mm Sword® RGB Series 600mm 29 pcs. 19 pcs. Sword® RGB Series 900mm 14 pcs. Sword® RGB Series 1200mm 11pcs. Sword® RGB Series 1500mm 32 pcs. Sword®...
POWER PACK SERIES Installation Instruction Power Pack 320 for Wall Installation Prepare the product for installation area Tighten the screws of product as shown in the figure. as its connectors bevel-down and without covering any ventilation area. Finish the installation.
Page 11
POWER PACK SERIES Installation Instruction Power Pack 1000 or 2000 for Rack Case Installation Tighten the screw and finish the installation. Install the product to the rack case as shown in the figure. Warning ! When using an equipment rack, mount units directly on top of each other.
Page 12
POWER PACK SERIES Installation Instruction Power Pack 1000 or 2000 for Wall Installation Make the mounting bracket vertical and tighten the screws as shown in the figure. Prepare the product for installation area as its connectors Tighten the screws of product and finish the installation. beveled-down and without covering any ventilation area.
POWER PACK SERIES Ordering Information P08002 Power Pack 320-48 Full Isolated DMX Splitter & 2 Out Power Supply P08004-Power Pack 1000-48 1000W 8 Outputs Power Supply P08013-Power Pack 2000-48 2000W 8 Outputs Power Supply *Standart product codes that we provided is above. Please contact us for special orders.
Need help?
Do you have a question about the Power Pack 320 and is the answer not in the manual?
Questions and answers