Changing Your Station Passcode - Samsung iDCS 16 User Manual

Samsung standard telephone user guide

Hide thumbs Also See for iDCS 16:

Table of Contents

Lift the handset and dial 642. Dial the station passcode (1234). Dial the per-

sonal speed bin number. Upon completion of this entry, you will hear three

short beeps. Immediately record the name. If you are successful, you will

hear a short burst of tone confirming the recording.

To place a call using Dial by Voice:

• Lift the handset.

• Dial 681 and speak the name.

• If the name is recognized, the call will be placed. If the name is not

recognized, you will hear error tone. Hang up and try again.

NOTE: This feature requires optional hardware and/or software. Ask your

installation and service company for details.

CHANGING YOUR STATION

PASSCODE

Your default station passcode is 1234. You can change your station pass-

code whenever you desire.

To change your station user passcode:

• Lift handset to go offhook then dial 15101.

• Then dial your existing station passcode.

• Then dial a new passcode (must be four digits).

• Redial your new passcode to verify. If successful, you will hear a con-

firmation tone.

• Hang up to store your new passcode.

NOTE: If you are presented with an error tone at any time, go on-hook and

resume from the beginning.

PERSONAL SPEED DIAL NUMBERS

CODE

NAME

_________________________

TELEPHONE NUMBER

_________________________

Table of Contents