Phone Buttons; Phone Slots, Ports & Jacks; Charge The Battery - Intel AZ210 User Manual

Table of Contents

Advertisement

1.2 phone buttons

Buttons
Press to go back to the previous screen or to close a
menu or dialog box.
Press to display actions and settings specific to the
current screen.
Press to return to the center panel of the Homescreen.
TIP:
Press and hold
recently used apps.
Press to search your phone and the web. See
for more information.
Power Button
Press and hold to turn your phone on. To turn the phone
off, press and hold, then follow the instructions onscreen.
When your phone is on, press to wake your phone or put it
into sleep mode.
Press on the top to increase the volume. Press on the
Volume
bottom to decrease the volume.
Press either top or bottom to silence an incoming call.
TIP:
Camera
Press and hold to switch to the camera.
Button
TIP:
When in the camera app, press to take a picture or to
start and stop recording a video.
1.3 phone slots, ports & jacks
3.5 mm Audio
Plug in headphones or other audio device.
Jack
USB/Power
Connect USB cord to phone and power adapter to charge
Port
the phone.
NOTE:
You can plug the USB cord to phone and connect
to your PC.
Micro-SIM
Tray to insert SIM Card. Use the SIM eject tool to open the
Card Tray
tray.
HDMI Port
Plug in HDMI cable and connect to TV or other electronics
to transmit HD images.
1.0 get started
to display shortcuts to your most
Search

1.4 charge the battery

Before using your phone for the first time, charge the phone for eight hours.
To charge the battery:
1.
Attach one end of the USB cord to the phone's micro-USB port and the
other end to the plug.
2.
Plug the phone into the walll.
1.4.1 battery tips
Connect
this end to
phone's
USB port.
For the best battery life, let your battery drain down to 20% or less (indicated
by an orange battery icon in the status bar) before recharging, and do not leave
your phone plugged in after it is fully charged.
To make your charge last as long as possible:
• Change the screen timeout rate and display brightness
(see Display Settings).
• Disable Wi-Fi and NFC not in use when not in use (see Wireless & Networks
Settings).
Plug into wall.
Connect this end
to plug.
PAGE : 5

Advertisement

Table of Contents
loading

Table of Contents