Listening To Music From Your Portable Player Or External Device; Changing The Lighting Effect; Recording To Usb; To Select Recording Bit Rate And Speed - LG CM6520 Owner's Manual

Listening to music from your
portable player or external
device
The unit can be used to play the music from many
types of portable player or external device. (Refer to
the page 13)
1. Connect the portable player to the
PORT. IN (PORTABLE IN) connector of the unit.
Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing 1/!.
3. Select the PORTABLE or AUX function by
pressing FUNCTION on the remote control or
iPod/AUX, PORT. IN on the unit.
4. Turn the portable player or external device and
start it playing.

Changing the lighting effect

You can change the unit's lighting effects by
pressing LIGHT EFFECT on the unit in 5 types.
(Forward Level Mode/Peak Level Mode/Center
Level Mode/Reverse Level Mode/Shower Level
Mode)
CM6520-AP_DKENHLK_ENG.indd 23
Or

Recording to USB

You can record a various sound source to USB.
1. Connect the USB device to the unit.
2. Select a function in which you want to record
by using CD/USB, TUNER on the unit or
FUNCTION on the remote control.
One track recording - You can record to USB
after playing a file you want.
All tracks recording - You can recording to USB
after stop.
Program list recording - After showing the
programmed list, you can record it to USB.
3. Press REC. TO USB 2 on the unit or USB REC on
the remote control.
- If you connect both of USB1 and USB2, press
T ST. /MONO to record to USB1 and press I
to record to USB2.
4. To stop recording, press I on the unit or
Z ENTER on the remote control.
To select recording bit rate
and speed
1. Press REC. TO USB 2 on the unit or USB REC on
the remote control for longer than 3 seconds.
2. Press to select a bit rate;
- On the remote control: C/V
- On the unit: Y/U
3. Press REC. TO USB 2 on the unit or USB REC on
the remote control again to select the recording
speed.
4. Press to select a desired recording speed; (Only
AUDIO CD)
- On the remote control: C/V
- On the unit: Y/U
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press REC. TO USB 2 on the unit or USB REC on
the remote control to finish the setting.
Operating 23
3
2012-05-02 3:55:24