BMW R 1200 R 2010 Rider's Manual page 101

or the specialized workshop of
the TPC/RDC sensor.
Removing front wheel
Make sure ground is level and
firm and park motorcycle.
with BMW Motorrad Integral
OE
ABS
Unclip two clips 1 of the sen-
sor cable on brake line.
Mask off area of wheel rim that
could be scratched in process
of removing brake calipers.
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake disk on reassem-
bly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove screws 2 of brake
calipers on left and right.
Push brake pads 3 apart
slightly by rocking the brake
caliper 4 back and forth against
the brake disk 5.
Carefully pull brake calipers
back and out until clear of
brake disks.
Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends BMW Motorrad rear
wheel stand.
Installing rear-wheel stand
( 106).
8
99
z