Download Print this page

Vivitek LauncherX Quick Start Manuals

Download this manual

www.vivitekcorp.com

Need help?

Do you have a question about the LauncherX and is the answer not in the manual?

Page 1 www.vivitekcorp.com...
Page 2 Connect the LauncherX to the NovoPRO. NOTE: The NovoPRO must be powered on and connected to a display. Loading... The main button on the LauncherX lights up red and a Loading screen is shown on the display.
Page 3 SSID: IP Address: Wait for the main and corner buttons on the LauncherX to light up blue and the Pairing Completed screen to be shown on the display. Connect the LauncherX to a computer and the Novo software will run automatically.
Page 4 Wait for the main button on the LauncherX to light up red, and then press the button. Your computer’s screen is shown on the display.
Page 5 Press any corner button on the LauncherX to project your computer’s screen onto the corresponding quadrant of the display.
Page 6: Additional Information
ADDITIONAL INFORMATION Safety & Warning Information FCC - Federal Communication Commission (USA) This device contains the following wireless device and underwent the certification process of FCC Part 15 Subpart B / CISPR 22 ET Docket No. 95-19 under the respective FCC ID Below: •...
Page 7: Contact Information
CONTACT INFORMATION Vivitek U.S.A. Corporate Office 46101 Fremont Blvd. Fremont, CA 94538 Tel: (855) 885-2378 (855) 885-2378x1 - Sales (855) 885-2378x2 - General Customer Services (855) 885-2378x3 - Technical Support...