Listening to Radio
You can listen to the chosen band (FM broadcast stations) by using either the
automatic or manual tuning operation.
Remote Control Unit
1
Press TUNER
button.
Main Unit
Press the FUNC.
1
button to select the
FM band.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
51
2
Tune into the
desired station.
Press the STOP ( ) button
Preset Tuning 1
to select PRESET and then
press TUNING
button to select the
,
preset station.
Press the STOP ( ) button to
Automatic Tuning 2
select "AUTO" and then press
TUNING
button to automatically search
,
the band.
Press STOP ( ) to select
Manual Tuning
MANUAL and then briefly press
TUNING
to tune into a lower or higher
,
frequency.
2
Select a broadcast
station.
Press the STOP ( ) button
Preset Tuning 1
to select PRESET and then
press
button to select the preset
station.
Press the STOP ( ) button to
Automatic Tuning 2
select "AUTO" and then press
button to automatically search the
band.
Press STOP ( ) to select
Manual Tuning
MANUAL and then briefly
press
to tune into a lower or
higher frequency.