Page 2
About This Manual This manual covers the installation procedures for the Tablet Recorder system. This integrated hardware and software system incorporates one of the following SoniClear digital recording software products: • SoniClear Meeting Recorder 9 • SoniClear Gov Recorder 9 •...
Table of Contents Using Tablet Recorder ......................4 Overview ......................... 4 Turning System On and Off .................... 4 Docking Station ......................4 Using Built-In Microphone ..................... 5 Using the Samson GoMic USB Microphone ..............5 Using the SC10 USB Microphone .................. 5 Using USB Audio Adapters ....................
Turning System On and Off Tablet Recorder is turned on using the power button on the upper left corner of the unit. It may be necessary to hold the button for several seconds to initiate the process of turning the system on.
Using Built-In Microphone Tablet Recorder is designed to use the built-in microphone, an external microphone, or an external audio interface. To record with the built-in microphone, do not plug in any external microphone or audio adapters before starting SoniClear. The internal microphone will be selected automatically.
For systems that include a video camera, the system will be configured to automatically record using the camera. Connect the camera to the Tablet Recorder computer using the supplied Ethernet cables. The camera is powered by an Ethernet power injector accessory, or by a powered Ethernet switch.
Ethernet jack on the Tablet Recorder hub device. It cannot be connected with the hub, because there is no Ethernet jack on the tablet computer itself. See the Video Recording Kit User Guide for additional information about video setup options.
SoniClear Software Operation For instructions on how to use the features of SoniClear 9 software, see the SoniClear User Guide included with the system. The User Guide is also available from the Help/SoniClear Help menu selection in the program, or online at the SoniClear website.
System Installation and Support Overview Tablet Recorder is a pre-configured computer. No installation steps are required for the recording software. The computer is configured without a password. It is recommended that a user name and password are added to the computer for security, if it is going to be connected to a network.
SoniClear will coordinate repair services and ensure proper installation of the SoniClear software installed on the computer, on customer request. For technical support from SoniClear, contact us by phone at 626-584-9706, or email at support@soniclear.com. For technical support from Microsoft, refer to their support information at: www.microsoft.com/surface/en-us/support.
Need help?
Do you have a question about the Tablet Recorder and is the answer not in the manual?
Questions and answers