Advertisement
Contents
Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Required Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Note: Please read and understand the instructions before starting the assembly.
Note: Remove all items from the shipping cartons and arrange them in a convenient location.
Note: If you need additional information, contact Wenger Corporation using the information below.
©Wenger Corporation 2016
Wenger Corporation, 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448
Questions? Call.....USA: 800-4WENGER (493-6437) • Worldwide: 1-507-455-4100 • www.wengercorp.com
Assembly Instructions and Owner's Manual
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Accessories (Sold Seperately) . . . . . . . . . . . . . . . . . . . . . . . .8
Printed in USA 07/16
Flex
TechBridge
®
Part #236A153-06
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Wenger Flex TechBridge
Summary of Contents for Wenger Flex TechBridge
-
Page 1: Table Of Contents
Note: Please read and understand the instructions before starting the assembly. Note: Remove all items from the shipping cartons and arrange them in a convenient location. Note: If you need additional information, contact Wenger Corporation using the information below. ©Wenger Corporation 2016... -
Page 2: Important User Information
Wenger Corporation. Wenger Corporation does not assume any responsibility for any errors that may appear in this manual. In no event will Wenger Corporation be liable for technical or editorial omissions made herein, nor for direct, indirect, special, incidental, or consequential damages resulting from the use or defect of this manual. -
Page 3: Required Tools
Required Tools • 3/8” Socket or Open End/Box End Wrench • 5/32” Allen Wrench Parts List Item Description Item Description Item Description Bridge Short Outer Upright Tube Self Tapping Screw, 1/4-20 x 3/4” Large Base Long Outer Upright Tube Carriage Bolt, 3/8-16 Small Base Locking Lever... -
Page 4: Assembly
Assembly 1. Attach the Poly Wheels to the Large Base using two 5/16 x 1” 5/16 x 1” Shoulder Screws and a 5/32” Allen Wrench. Shoulder Screws Poly Wheels Large Base 2. Insert the Short Outer Upright Tube into the Long Outer Base Assembly. - Page 5 Assembly (continued) 5. Insert one Inner Upright Tube into the Outer Tube of each Base Assembly. 6. Lock the Inner Upright Tubes into position by threading a Locking Lever into the hole located at the top of each Inner Upright Tubes Outer Upright Tube and hand tightening.
- Page 6 Assembly (continued) 8. Place the Mounting Bracket of each Base Assembly over the Carriage Bolts in the Bridge. Be sure that each Carriage Bolt goes through the matching holes in the Mounting Brackets. 9. Thread a Plastic Nut onto each Carriage Bolt to secure the Base Assembly to the Bridge. The plastic nut should be hand tightened only.
-
Page 7: Operation
Maintenance 1. Clean the Flex TechBridge with a mild detergent. Avoid using harsh or abrasive cleaning products. 2. Never apply oil or any lubricant to the height adjustment tube. -
Page 8: Accessories (Sold Seperately)
Accessories (sold seperately) Required Tools for Accessories Work Surface Mount: • Phillips Head Screwdriver Keyboard Mounts: • 9/16” Socket Wrench or Open End/Box End Wrench Work Surface Mount • 7/32” Allen Wrench Laptop Mount: • Phillips Head Screwdriver • 3/8” Socket Wrench or Open End/Box End Wrench Cupholder: •...
Need help?
Do you have a question about the Flex TechBridge and is the answer not in the manual?
Questions and answers