Installing The Cradle Stand; Installing The Wall Mount - Samsung HT-SB1 User Manual

connections
inSTAllinG THE cRADlE STAnD
You can use the cradle stand to install this unit on a shelf. Make sure you place the unit on a flat surface.
ConneCTing
Slide the cradle stand into the speaker until you
hear a click.
• Make sure the slot on the cradle stand is facing
forward when connecting.
inSTAllinG THE WAll MOUnT
You can use the wall mount bracket to mount this unit on the wall.
1. Place the wall mount bracket on a wall surface and then
secure it with two screws (not supplied).
. Then, fit the unit into the corresponding slots of the wall
mount bracket. For secure installation, make sure the
mounting studs slide firmly down into the bottom of the
slots.
. This is the completion of the suggested wall mount
installation.
▪
Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in an injury
or damage to the product.
▪
When the unit is installed on a wall, please make sure that a child does not pull any of connecting
cables, as it ma y cause it to fall.
▪
For the optimal performance in a wall mount installation, keep the speaker system at least 2 inches
(5cm) distant from the TV.
1
diSConneCTing
Press the button to disconnect the cradle stand
from the unit.
MAX
MIN
INPUT MODE
PCM
DOLBY
DTS
NEWS
CINEMA
MUSIC