Allen-Bradley 450L-AM-SM Installation Instructions

Installation Instructions

Original Instructions
Side Mounting Bracket Set for GuardShield Light Curtains
Catalog Numbers 450L-AM-SM
IMPORTANT
One set includes two brackets (each bracket includes one clamp, one adapter, and two M4 screws to fix the adapter in the clamp).
1. Insert two screws into the clamp (maximum size: M6, minimum
torque: 5 Nm (44.3 lb•in) to maximum of 6 Nm (53.1 lb•in) for
side- or back-mounting (screws not included in mounting set) and
mount the clamp on a solid base.
Clamp
3. Snap in the profile.
WARNING: A torque over 4.5 Nm (39.8 lb•in) for the M4 screws
will damage the clamp and a torque of over 6 Nm (53.1 lb•in) for
the M6 screws will damage the bracket.
Materials:
Clamp: PA
Adapter: ABS
Screws: Steel
(1)
(3)
2. Snap in the adapter.
4. Tighten both M4 screws (minimum of 3.5 Nm (31 lb•in) to
maximum of 4.5 Nm (39.8 lb•in) after aligning the light curtains
(rotate and shift up/down).
WARNING: Fasten side mounting bracket only to the aluminum
profile and not to the light curtain plastic top or end caps.
Adapter
(2)
(4)
(4)