Tribit XFree Color User Manual

What's in the box
Wireless Headphones XFree Color
User Manual
Notes:
Playback
When dialing a call, the indicator will flash blue twice every 3s.
Function Status of headphones Operation
When receiving an incoming call,the indicator will quick flash blue
Volume up Playing music Press V+ button When in a call, the indicator will flash blue once every 3s
Volume down Playing music Press V- button
Charging the headphones
Last track Playing music Press and hold V+ button for 2 seconds When battery is low, the indicator will flash red and beep sound prompt every 60s . Charge
the Bluetooth headphones as required.
Next track Playing music Press and hold V- button for 2 seconds
1. Connect micro cable to the micro USB-port on the headphone control tab, and a compatible
Play Music paused Press MFB button
USB dock or adapter.
Pause Playing music Press MFB button
2. The indicator light will glow red to indicate charging.
3. When the headphones are fully charged, the indicator light will change from red to blue.
Hands Free Calling
Note:
Function Status of headphones Operation
The
XFree Color
Incoming call
Answer call Press MFB button once input voltage or the use of quick charge adapters with higher voltage output may
damage your headphones.
During a call
End call Press MFB button once
The headphones must be fully charged prior to first-time use.
Reject call Incoming call Press and hold MFB button for 2 seconds
When connected to an IOS device, the remaining battery of the headphones will be displayed
on the IOS device.
Redial last phone Standby mode
Double press MFB button
(already paired)
number
Reset
Standby mode Press MFB and V+ button simultaneously
Voice dialing
(already paired) for 1s.(MFB button must be pressed first) In standby mode, press the V+ button and V- button simultaneously for 5 seconds to reset to
default settings. The indicator will flash blue 1s and then enter pairing mode will flash red and
Press and hold MFB button for 2 seconds
Answer and
blue lights.
to answer and end a call
During a call
transferring two calls
Press MFB button to transferring calls FAQs and Solutions
Call transferring
1. I can't turn on my Headphone.
between headphones During a call Double press MFB button
Ensure the Headphone are fully charged before use, the device will not turn on if battery is
and phone
very low.
Volume up During a call PressV+ button
2. I can't find the Headphone on my device.
During a call Check that the Headphone are in pairing mode and the LED indicator is flashing blue
Volume down Press V- button
and red.
Overview-buttons & indicators
Ear hook
Ear tip
Ear Tips (S, M, L)
Ear Hooks (S, M, L)
Indicator Light
Volume +
Multifunction Button
(MFB)
Volume -
Cable Clip Travel Pouch
Wireless Headphones XFree Color
User Manual
Micro USB Cable User Manual
Make sure your Bluetooth device is close to the Headphone within 3 feet.
Turn off the Headphone and the Bluetooth device, then turn on the Headphone and
then restart Bluetooth device. Then retry the pairing method.
Reset your Headphone and try again.
3. I can find the Headphone on the Bluetooth device list but can't successfully
connect them.
Disconnect your Bluetooth device from any previously connected devices. Restart the
Bluetooth device and retry connecting the Headphone.
Remove the Headphone from Bluetooth device list and pairing again.
Reset your Headphone and try again.
4. After pairing, there is no sound in Headphone when playing music or answering call.
Make sure the Headphone have been successfully paired with your device.
Bluetooth Headphones require a charging input voltage of 5V, higher
Make sure the Bluetooth device is playing music/audio.
Make sure the volume is not too low or mute on both your Headphone and the
Bluetooth device.
Reset your Headphone and try again.
Some phones do not have the full stereo music function, check by connecting to
another cellphone to test the Headphone.
5. After pairing, the sound is not very clear/the caller cannot hear my voiceclearly
and cuts out intermittently.
Please adjust the volume on your Bluetooth device and Headphone.
Units are out of range (within10meters), Bring units closer together.
Make sure there is no interference source (electrical or magnetic) nearby.
Recharge your headphone, the power may be too low.
6. The Bluetooth Device ask for a password/pin while pairing
Most Bluetooth devices don't require a password / pin during pairing, but enter "0000"
(four zeros) if asked
Installing & Wearing
Specially-designed earbuds for exceptional comfort, fit, and sound.
(Locate the point of hook to
align with the wire)
Micro USB
Specifications
Bluetooth version Bluetooth V4.1
Bluetooth profile HFP, HSP, A2DP, AVRCP
Input
DC 5V / 0.5A
Charging time about 2h
Working time
10h
Standby time
400h
Weight 14g
Power on/off
Function Operation
Sound
Press and hold MFB button for 2 seconds until the
Power on beep sound prompt
indicator flashes blue for 1 second
Press and hold MFB button for 4 seconds until the
Power off beep sound prompt
red indicator flashes 1 second. The headphones will
power off .
Note:
The indicator will flash blue twice every 5 seconds, when the headphones are in
standby mode (not paired with devices).
The headphones will automatically power off if unpaired for more than 5 minutes.
Pairing Your Headphones
1. Keep your headphones turned off and within 1 meter of your phone.
2. Press and hold MFB button for 5 seconds until the indicator lights flash red and blue,
and heard the beep sound prompting will indicate pairing mode has been activated.
3. Activate the Bluetooth function on your Bluetooth-enabled device.
4. Select the profile name Tribit XFree Color from the list of Bluetooth devices found by
your device and connect (input pairing code 0000 if needs).
5. Heard the beep sound prompting and indicator lights flash blue will indicate that
pairing has been successful and the headphones are now connected.
Notes:
The headphones will automatically connect with the device they were paired with the last
time when you turned it on.
If the pairing is unsuccessful, turn off the headphones and repeat the steps above to try again.
The indicator light will flash blue once every 7 seconds when the headphones are paired
with a device or playing music.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1)this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
V1.0.0