Advertisement
Quick Links
INSTALLATION AND OPERATION INSTRUCTIONS
HEX NUT
3/8-16
STEP #1 CASTER
INSTALLATION.
1/2-13 X 1" LG
HEX BOLT
STEP #2 MAST
INSTALLATION
LM-200-R
BATTERY BOX
1.
ATTACH CASTER SUPPORTS TO BATTERY BOX
USING HARDWARE NOTED.
2.
DO NOT TIGHTEN BOLTS ALL THE WAY AT THIS TIME.
MAST ASSEMBLY
LOW VOLTAGE SWITCH
1.
INSERT MAST ASSEMBLY INTO BATTERY BOX
MAKING SURE THAT THE LOW VOLTAGE SWITCH
IS FACING THE BATTERIES. MAKE SURE THAT ALL
WIRES ARE FREE AND ARE NOT PINCHED.
2.
BEFORE INSTALLING 1/2" BOLTS MAKE SURE THAT
MAST ASSEMBLY IS COMPLETELY INSERTED IN
BATTERY BOX.
3.
TIGHTEN BOLTS.
CASTER SUPPORT
RH & LH
HEX BOLT
3/8-16 X 1" LG.
BATTERIES
Advertisement
Related Manuals for QSP LM-200-R
Summary of Contents for QSP LM-200-R
- Page 1 LM-200-R INSTALLATION AND OPERATION INSTRUCTIONS BATTERY BOX CASTER SUPPORT RH & LH HEX NUT 3/8-16 HEX BOLT 3/8-16 X 1" LG. STEP #1 CASTER ATTACH CASTER SUPPORTS TO BATTERY BOX USING HARDWARE NOTED. INSTALLATION. DO NOT TIGHTEN BOLTS ALL THE WAY AT THIS TIME.
- Page 2 MOUNT WHEEL LIFT SUPPORT TO ALUMINUM TROLLEY USING HARDWARE NOTED. ATTACH FORK ASSEMBLY USING HARDWARE NOTED. WHEEL LIFT SUPPORT 3/8-16 x 3/4" HEX BOLT WASHER,LOCK WASHER ALUMINUM 3/8-16 X 7/8" TROLLEY HEX BOLT HEX NUT WASHER LOCK WASHER ROLLER FORK ASSEMBLY STEP #3 FORK ATTACHMENT BLACK JUMPER WIRE -214 CONNECT...
-
Page 3: Step #5 Battery Charger Installation
5/16-18 CHARGER BRACKET HEX BOLT MAST REAR VIEW 5/16-18 HEX NUT BATTERY CHARGER BOTTOM OF BRACKET TO BE INSTALLED 15 1/2" ABOVE NOTE: BATTERY BOX. SLIDE (6) HEX HEAD BOLTS IN CHANNEL ON REAR OF MAST. THESE BOLTS WILL BE USED TO ATTACH CHARGER BRACKET, TOOL TRAY AND HANDLE.
Need help?
Do you have a question about the LM-200-R and is the answer not in the manual?
Questions and answers