Minimizer FKPB5B Important Safety Information

12. Move the accelerator, brake, and clutch pedals
through their full range of motion to conirm there
is no interference with the Minimizer loor mat.
13. Prior to operating the vehicle, read the Safety
Instructions for Vehicle Operation.
14. FAILURE TO CORRECTLY INSTALL AND USE
YOUR MINIMIZER FLOOR MATS ACCORDING TO
THE INSTRUCTIONS ABOVE COULD PREVENT
PROPER FUNCTIONING OF THE VEHICLE'S PEDALS,
POTENTIALLY RESULTING IN LOSS OF CONTROL OF
THE VEHICLE AND SERIOUS INJURY OR DEATH.
Headquartered in Blooming Prairie, Minnesota, USA, Minimizer manufactures poly
truck fenders, poly toolboxes, customized mud laps, loor mats, and bracket kits.
Family owned and operated for nearly 3 generations, Minimizer parent company
Spray Control Systems, Inc., was founded in 1983. Minimizer aims to provide
products tough enough to please tough people in a tough industry. All Minimizer
products are made in the USA.
Manufactured by Spray Control Systems, Inc. (SCSI)
500 Minimizer Way, Blooming Prairie, MN 55917
800.248.3855 • Fax: 507.583.7540
www.minimizer.com

WARRANTY

Minimizer Floor Mats are backed by a
Lifetime Manufacturer's Warranty and are
guaranteed against laws due to faulty
materials and/or unintended production
variations. This warranty extends only to
the original purchaser and excludes dam-
age caused by abnormal use or conditions,
including but not limited to extreme abra-
sive conditions and/or excessive exposure
to chemicals such as bleach, gasoline and
other fuels.

IMPORTANT SAFETY INFORMATION

READ BEFORE INSTALLING OR USING MINIMIZER FLOOR MATS
FLOOR MAT KIT FKPB5B IS COMPATIBLE WITH THE FOLLOWING PETERBILT TRUCK MODELS:
• 357 – Build Date 5/2004 Through The Model Year 2005
• 378 – Build Date 5/2004 Through The Model Year 2005
• 379 – Build Date 5/2004 Through The Model Year 2005
• 385 – Build Date 5/2004 Through The Model Year 2005
FLOOR MAT KIT FKPB6B IS COMPATIBLE WITH THE FOLLOWING PETERBILT TRUCK MODELS:
• 357 – All build dates prior to 5/2004 • 377 – All build dates prior to 5/2004
• 378 – All build dates prior to 5/2004 • 379 – All build dates prior to 5/2004
• 385 – All build dates prior to 5/2004

Safety Instructions for Installation

• Use only with the speciied vehicle make, model and year.
• Do not install on top of other loor mats.
• Install each loor mat with the Minimizer logo facing up.
• Use each loor mat only in its proper location in the vehicle.
• Install and use a retention hook for the driver side loor mat.
• Make sure that the loor mats it properly in your vehicle loor space.
• Do not place additional loor mats on top of the Minimizer loor mats.
• Carefully follow each of the Installation Instructions for Minimizer Floor Mats on the following pages.

Safety Instructions for Vehicle Operation

• Before starting or operating the vehicle, verify that the Minimizer loor mats are installed
correctly, that the driver side mat is secured by a retention hook, and that the driver side
mat does not interfere with the accelerator, brake, or clutch pedal.
• Make sure there are no loose objects in the vehicle that could possibly interfere with the
operation of the accelerator, brake, or clutch pedal.
• If your Minimizer loor mat becomes loose, stop the vehicle at the next safe location.
Re-install the loor mat properly and securely. If that is not possible, remove the loor mat
and place it in a location where it will not interfere with safe operation of the vehicle.
• Inform all drivers of these warnings before allowing them to operate a vehicle equipped with
Minimizer loor mats.
If you have questions about these instructions or proper installation of your Minimizer loor mats,
please contact Minimizer at (800) 248-3855.
Item # 103543 December 2017