GHOST™ HD16 GHOST™ HD16 BLACK GHOST™ HD20 MODEL 3750 MODEL 3751 MODEL 3755 GHOST™ GAME CAMERA SERIES INSTRUCTION MANUAL PLEASE READ CAREFULLY BEFORE USE! IMPORTANT – DO NOT TAKE BACK TO RETAIL! ANY QUESTIONS, OUR CUSTOMER SERVICE IS HERE TO HELP! Additional Information on this product and answers to frequently asked questions can be found at www.hawkhunting.com.
Page 2
PAGE INDEX Introduction Parts & Controls Battery and SD Card Installation Setup and Use 6-12 Technical Specifications 13-15 Trouble Shooting and Frequently Asked Questions Warranty 03-2018 – 00 Page 2 QUESTIONS? Call 810-626-3026 or Visit www.hawkhunting.com...
Connect your Ghost™ Camera to the SYNC™ App with Bluetooth® to check overall camera status, SD card capacity, battery levels and even capture a test preview photo. The HAWK® SYNC™ App is scouting & camera set-up made easy! IMPORTANT SAFETY INFORMATION Read all warnings, precautions and safety/operating instructions prior to operating this product.
Page 4
BLUETOOTH OPERATION COMPLIANCE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 5
PARTS & CONTROLS ¼-20 Thread Mount Video PIR Sensor Motion/Light Indicator Light Strap Sensor Flash Attachment Hole Cable Lock Lens Hole Serial Number Micro SD Power Card Slot Switch 6V DC In USB Port Control DC In Panel Door Cover Plug Battery Compartment Battery Compartment Latch CAMERA POWER CONTROLS:...
Page 6
BATTERY AND MICRO SD CARD INSTALLATION BATTERY REQUIREMENTS AND INSTALLATION (BATTERIES NOT INCLUDED): • HAWK® recommends using 4 new Lithium AA (Energizer® brand) batteries to obtain maximum battery life or 4 new alkaline AA batteries. NiMH Rechargeable batteries are not recommended, as they produce lower voltage that can cause operational issues.
SETUP AND USE DEFAULT SETTINGS – OUT OF BOX USE: • HAWK® Ghost™ Cam ships from the factory with the following default settings and can be used prior to downloading and using HAWK® SYNC™ APP. FACTORY SETINGS • 1 Photo Per Trigger •...
Camera and close control panel. 3. Make sure ‘Bluetooth’ in your phone/tablet settings is ‘turned on’. 4. Open HAWK® SYNC™ APP and ‘SIGN IN’ to APP. 5. Press ‘+’ sign in top left corner to find camera. 6. Press ‘ADD CAMERA’ to find device.
Page 9
REMEMBER AND/OR SAVE YOUR PASSWORD IN SAFE PLACE. This Password option is designed to deter thieves and the only way to recover your password will be to ship camera back to Hawk® Customer Service. CAUTION: AFTER SETTING PASSWORD, NO USER WILL BE ABLE TO CONNECT CAMERA TO HAWK® SYNC™ APP TO CONTROL SETTINGS WITHOUT THE CORRECT PASSWORD.
Page 10
SETUP AND USE CAMERA MODE SETTINGS: • Image Size – Choose from native [lower] resolution or digitally enhanced [higher] resolution. The lower native resolution will save space on Micro SD Card, allow the camera to process faster and in many cases photo detail will be more than sufficient for viewing on most computer screens and smaller devices.
SETUP AND USE VIDEO MODE SETTINGS: • Video Size – Choose from 640x480 [lower] resolution or 1280x720 [higher] resolution. • Video Length – Length of video recorded with each trigger event. Dynamic Video - Default ‘Off’. Dynamic Video setting will override manual ‘Video Length’ setting and will continue recording video for entire period motion is detected in video range.
SETUP AND USE MOTION AND VIEW TEST: • Select Motion and View Test • View Test • Press Test Photo – This shows a thumbnail picture of what your camera is seeing. Allows quick check of camera to assure it is in correct position. •...
1. Make sure your mobile device is within 30 feet of camera. 2. Make sure ‘Bluetooth’ in your phone/tablet settings is ‘turned on’. 3. Open HAWK® SYNC™ APP and ‘SIGN IN’ to APP. 4. Select Camera in APP. This will take you to “SETTINGS PAGE”...
Please change batteries to solve this issue. Additional Trouble shooting and FAQ's View the Advanced Support section in the HAWK Sync App. Or contact Customer Service at 810-626-3026 or e-mail at contact@hawkhunting.com for assistance.
To register and validate your Limited Warranty, please create an account and sync your Ghost™ camera on the HAWK® SYNC™ App and follow the instructions provided. If you have any issues or need assistance please contact a representative at HAWK Hunting.
Page 19
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 20
—Consult the dealer or an experienced radio/TV technician for help. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement.
Need help?
Do you have a question about the Ghost HD16 and is the answer not in the manual?
Questions and answers