Subscribe to Our Youtube Channel
Related Manuals for Lencarta Atom 180
Summary of Contents for Lencarta Atom 180
- Page 1 Atom 180 portable flashgun The Atom 180 forms part of the Atom portable flash system and is used in conjunction with the AtomPower portable battery pack & range of dedicated light shapers...
- Page 2 Thank you for purchasing the Atom 180 portable flash. These instructions relate ONLY to the Atom180, please refer to the separate instructions for other products in the Atom range Instruction Manual...
-
Page 3: Table Of Contents
Keep for future reference. Names of Parts • Body The ATOM 180 is a powerful and portable lighting system designed for professional photographers and photography enthusiasts. It is compatible with • Control Panel cameras from Canon, Nikon, Pentax, Olympus etc. The ATOM 180 offers: •... -
Page 4: Names Of Parts
2. Insert the reflector into the Accessory Mount (1). 18. SET Button 19. ON/OFF Power Switch 20. Test Button/ Flash Ready Indicator 21. Select Dial The flash unit t draws its power from Lencarta AtomPower portable battery pack (sold separately). - 03 - - 04 -... -
Page 5: Attaching Flash Tube
… 1/1-0.3 1/1-0.7 1/2-0.3 1/2-0.7 … The flash unit is not powered by itself, but draws power from the Lencarta Atom 1/2+0.7 1/2+0.3 1/4+0.7 1/4+0.3 PowerPack (sold separately). ←Figures displayed when increasing flash output level - 05 - - 06 -... -
Page 6: Flash Output
Press MODE Selection Button (17) to enter M mode. In this mode, you can set the flash unit onto either your camera hot shoe or your trigger hot shoe for firing. Before shooting, adjust the power output of the ATOM 180. When the camera’s Flash Output shutter is pressed, the flash will fire. -
Page 7: Mf-Assist Beam
60 (m ISO 100, with standard reflector) Guide No. (m ISO 100) To control the flash wirelessly, you need a you need a LENCARTA remote control remote control set (on-camera and on-flash). Insert its receiver into the Approx. 28mm flash coverage when operating on a Wireless Control Port (7) on the flash and insert the transmitter into the camera hot shoe. -
Page 8: Maintenance
Maintenance Shut down the device immediately should abnormal operation be detected. Avoid sudden impacts. It is normal for the flash tube to be warm when in use. Avoid continuous flashes if possible. Maintenance of the flash must be performed by our authorised maintenance department which can provide original accessories.
Need help?
Do you have a question about the Atom 180 and is the answer not in the manual?
Questions and answers