SPECIALTHING INTERNATIONAL HP-52RBJ User Manual

DIGITAL AM / FM STEREO HEADPHONE RADIO WITH BLUETOOTH
When the headset is turned on, all settings are resumed to the last (previous) settings.
For U.S.A. users, 10 kHz is recommended.

To select 9 or 10 kHz for AM, the procedure is as shown here below:

Keep unit in OFF position.

During time setting mode, press

9 kHz will be shown on the display.

Press Scan

After selection, turn on the headset to activate the Radio.
-

Insert Battery


Turn off the headset. Open the battery door, insert 3 pieces AAA sized batteries. Close the battery
door.
-

Time Setting


Turn off the headset by turning the volume knob in anti clockwise direction. Press
select 12 or 24-hours mode.

Turn off the headset by turning the volume knob in anti clockwise direction. Press MODE button.
When time is flashing, press ▲ or ▼ to adjust the hour, then press MODE to confirm. Then adjust
minutes, apply same procedure as above, then press MODE button to confirm the setting.


Radio Mode


Turn on the headset by tuning the Power ON/OFF Knob (which combines with Volume Control) in
clockwise direction.

Tap quickly the
radio.

Manual search: Press ▲ or ▼ (scan) buttons step by step until it reaches your desired station.
 Auto Scan: Press ▲ or ▼ (scan) buttons for 2 seconds, then release the button when seeking starts.
MODEL NUMBER: HP-52RBJ
& AUX-IN JACK
USER MANUAL
or to select 10 kHz.
button to toggle between FM/AM/BT Setting. Set to AM or FM to listen to
button for 2 seconds.
button or to