Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Steelmaster 4800
- Page 1 4800 Owner’s Manual 4800 Currency Counter...
-
Page 3: Table Of Contents
TABLE OF CONTENTS 4800 Page 1. Product View 1.1. Front and Rear Views 1.2. LED Display 2. Operation 2.1 Operation Modes 2.2 The Right Way to Load the Bills 3. Troubleshooting 3.1 Error-Message Display Codes 3.2 Adjustment Screw 3.3 Changing the Wear and Tear Parts 3.4 Operational Problems... -
Page 4: Product View
1. PRODUCT VIEW 4800 1.1 Front and Rear Views 1. Hopper 2. Retractable Handle 3. Lid 4. Control Panel 5. LED Display 6. External Display 7. Stacker 8. Adjustment Screw 9. External Display Outlet 10. Power Outlet 11. Fuse 12. Power Switch... -
Page 5: Led Display
1. PRODUCT VIEW 4800 1.2 LED Display 1. Count Mode Indicator 2. Bill Count Display 3. Batch/Add Display 4. Add/Batch Mode Indicators, Alarm Indicator... -
Page 6: Operation
2. OPERATION 4800 2.1 Operation Modes 1. Add Mode 3. +1 For Batch Mode 2. Batch Mode 4. Reset/Clear (ADD) ADD MODE To turn on ADD Mode, press ADD. ADD mode allows you to count multiple stacks of bills while maintaining a grand total amount. -
Page 7: The Right Way To Load The Bills
2. OPERATION 4800 2.2 The Right Way to Load Bills Please load the bills in the machine the same as the following steps... -
Page 8: Troubleshooting
3. TROUBLESHOOTING 4800 3.1 Error-Message Display Codes Code No. Malfunction causes Solutions The left counting sensor is broken or dirty Replace or clean sensor The right counting sensor is broken or dirty Replace or clean sensor The code disc is dirty or loose... -
Page 9: Adjustment Screw
3. TROUBLESHOOTING 4800 3.2 Adjustment Screw Due to long transportation and long use, the screw may become loose. When counting is not accurate, turn the up/down screw clockwise to increase the friction. 3.3 Changing The Wear And Tear Parts When the rubber tongue is worn out, please flip it and use the other side. -
Page 10: Operational Problems
3. TROUBLESHOOTING 4800 3.4 Operational Problems Note: When counting is not accurate, please check the following: Is the power cord Is the fuse is blown? Is the power switch on? securely connected? No power Is the hopper sensor Make sure the hopper... -
Page 11: Specifications
4. SPECIFICATIONS 4800 4. Specifications Dimensions: 9.45" x 11.42" x 8.66" Weight: 14.3 lbs Counting Speed: 1,080 bills/min Power consumption: working ≤ 90W Sleeping: <3W Power Source: 220V ± 10% 50 Hz 110V ± 10% 60Hz Noise: <60dB Hopper Capacity: 170 bills Ambient Temperature: 32°... -
Page 12: Safety/Warnings
5. SAFETY/WARNINGS 4800 5.1. Cleaning the Machine Warning: Before doing any cleaning, turn the power switch off and disconnect the power cord from the machine. 1. Cleaning the Optical Sensors It is very important to clean all the sensors in the machine with a soft brush to avoid any paper particles or dust from sticking to the light-transmitter or the light-receiver sensors. -
Page 13: Maintenance Notice
5. SAFETY/WARNINGS 4800 5.2 Maintenance Notice 1. The machine must be safely connected to the power source. 2. The machine must be kept in dry and ventilated place to avoid strong sunlight. 3. The machine must be kept far away from strong magnetic fields and the interference of Hertzian waves. -
Page 14: Warranty
STEELMASTER provides a limited, three-year replacement warranty for ® this unit (4800). This warranty is limited and conditional as the following: • Three-years from the date of original purchase. Applies only to the original purchaser. All warranty claims must be accompained by the proof of purchase. - Page 16 4800 1505503...
Need help?
Do you have a question about the 4800 and is the answer not in the manual?
Questions and answers