Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for VideoComm Technologies IPO-720iDVR
- Page 1 IP Digital H.264 Video Encoder Series Manual Rev. B It’s About Real Time IP Digital H.264 Video Encoder Series Manual Rev-B OWNER’S MANUAL (888) 379-2666 US Toll Free (905) 336-9665 Phone (905) 336-9662 Fax www.VideoTransmitters.com...
-
Page 2: Table Of Contents
IP Digital H.264 Video Encoder Series Manual Rev. B TABLE OF CONTENTS TABLE OF CONTENTS………………………………………………………………………………………………………..2 SAFETY NOTICE……………………………………………………………………………………………………………….3 INTRODUCTION……..…………………………………………………………………………………………………..3 PARTS LIST…………………………………………………………………………………………………………………….4 PRODUCT DESCRIPTION………………………………………………………………………………………………..4 LED INDICATORS…………..……………………………………………..……………………………………….4 CONNECTORS, I/O & SLOTS…………………..……………………………………………..………………….5 DEVICE RESET…………..……………………………………………..…………………………………………..5 DEFAULT PARAMETERS…………………………………………………………………………………………………5 BASIC CONNECTIONS..………………………………………………..………………………………………………….…6 PC STATIC IP ADDRESS SET-UP…...……………………………………………………………………………………...7 USING WINDOWS XP……………………………..……………………………………………..………………..7 USING WINDOWS 7………………….………………….……………………………….……………………………….7 INTERNET EXPLORER ActiveX CONTROL……………………………………………………………………………7 LOGIN &... -
Page 3: Safety Notice
II. In order to comply with the FCC/IC adopted RF exposure requirements, this system will be installed by an authorized professional installer of VideoComm Technologies. Installation of all antennas must be performed in a manner that will provide at least 23cm clearance from the front radiating aperture, to any user or member of the public. -
Page 4: Parts List
Please inspect the packaging carefully to ensure you have received all the necessary parts and accessories listed. Refer to the following chart to determine which parts are included with your product. If any parts are missing or damaged, contact VideoComm Technologies, Customer Service or your re-seller immediately. PRODUCT DESCRIPTION Minimum System Requirements The H.264 Network IP Video Encoder Series includes an embedded web server which provides users full... -
Page 5: Connectors, I/O & Slots
IP Digital H.264 Video Encoder Series Manual Rev. B Connectors, I/O & Slots: Device Hard Reset: Each IP Video Encoder includes a convenient Reset button which is used to restore the factory default settings. Disconnect the Power Adapter from the “DC 12V” input plug to power OFF the device. Press and HOLD the reset button by inserting the supplied paper clip into the “RST”... -
Page 6: Basic Connections
Compare the unit to the product photo on the attached specification sheet. Check for physical damage to the devices, contact your distributor or VideoComm Technologies Technical Support immediately should you suspect damage to the unit. 2. Bench Testing Your H.264 Network Video Encoder Device ... -
Page 7: Pc Static Ip Address Set-Up
IP Digital H.264 Video Encoder Series Manual Rev. B PC STATIC IP ADDRESS Using Static IP addresses prevents conflicts between devices on a network and allows you to manage them easily. Assigning a Static IP address to your Windows PC or LAPTOP requires essentially the same process, but the locations of the steps may vary between versions of Windows. -
Page 8: Login & Password
IP Digital H.264 Video Encoder Series Manual Rev. B LOGIN & PASSWORD SET-UP Changing the Video Encoders Login and Password is critical to the security of the device. We strongly recommend that the ‘Admin User’ Login and Password are changed once the device has been configured for network access. The (Admin User) assignment will allow the Administrator Only to configure the device parameters. -
Page 9: Wide Area Network Setup
IP Digital H.264 Video Encoder Series Manual Rev. B WIDE AREA NETWORK (WAN) SET-UP Now that you have successfully set-up the IP video encoder to your local area network (LAN) the device can be configured to a wide area network (WAN) for remote access enabling multiple authorized users to view live and recorded video at any time and from virtually any networked location in the world. -
Page 10: Wireless Network (Wifi)
IP Digital H.264 Video Encoder Series Manual Rev. B WIRELESS NETWORK SET-UP (IP-720IDVRW & IPO-720IDVRW ONLY) The embedded wireless feature allows users to access the IP Video Encoder from nearly any convenient location within the wireless routers networking environment. With minimal initial set-up the Wireless IP Encoders will only require an access point for communication eliminating the need to run complex physical cables to locations saving money in wire, suspended raceways, and labor. - Page 11 IP Digital H.264 Video Encoder Series Manual Rev. B Power the IP device using the supplied 12VDC plug-in power adaptor. Ensure that the “PWR” LED is Solid to confirm the device is ON. Connect the IP Device to an Enabled RJ45 LAN input on your PC with the included 3’ Network Cable Open an Internet Explorer browser and enter the device IP address (Default 192.168.1.19) Login to the Encoder (Default Login 888888...
- Page 12 Figure E Once the configuration is complete, the 3G Video Encoder can now be viewed anywhere by simply entering the “Static Public IP” address assigned by your mobile provider into any Internet Explorer browser. VideoComm Technologies Customer Service Bus (905) 336-96651...
-
Page 13: Warranty Statement
5.8GHz All Weather 8 Channel Series Manual Rev. M WARRANTY INFORMATION/ TERMS & CONDITIONS VideoComm Technologies, herein referred to as “VCT.” LIMITED WARRANTY VCT hereby warrants, subject to the conditions here in below, that should this product become defective by reason of improper workmanship or material defect during the specified warranty period, VCT will repair the same, effecting all necessary parts without charge for either parts or labor, or replace the unit at VCT option. - Page 14 5.8GHz All Weather 8 Channel Series Manual Rev. M...
-
Page 15: Notes
5.8GHz All Weather 8 Channel Series Manual Rev. M NOTES... - Page 16 5.8GHz All Weather 8 Channel Series Manual Rev. M IT’S ABOUT REAL-TIME Direct 1+(905)336-9665 Toll Free 1+(888)379-2666 www.VideoTransmitters.com...
Need help?
Do you have a question about the IPO-720iDVR and is the answer not in the manual?
Questions and answers