locpro C200 Series User Manual

C200 Series
[Touch / RF Tag / Key]
■ Please read the manual thoroughly in order to secure your safety and to use the product
properly.
■ Please use the RF Tag which is provided with door lock.
■ If you use the RF Tag which is not provided with door lock, it may occur security problem.
C200 [Touch / RF Tag / Key
(3Way Model only)
Smart & Premium Design
Electric Shock & Static Proof
MEMO
Contents in user manual can be changed without notifying users in order to
improve product quality or service.
Index
Introduction
Safety Information
Parts
Components name
Basic Functions
How to register passcode
How to register RF Tag
How to delete RF Tag
How to open door from inside
How to open door from outside
Additional Functions
Outside force-lock function
Etiquette mode function
Inside force-lock/release function
Passcode hide function
Reset function
High temperature alert function
Intrusion alert function
Prank Prevention function
Deadbolt jamming alert function
Auto/Manual lock setting
Volume control function
Low battery alert function
Door open alert function
How to change batteries
Opening door with emergency battery
Register & Delete function of master passcode/RF Tag
Incapacitation function of usual user' s passcode and RF Tag
Wireless communication module registration (Optional Product)
Remote controller Registration (Optional Product)
Checklist before calling for service
Specifications
Features
]
Open/Close function
Door open by entering passcode
Door open by RF Tag / Door open by emergency key
Door open by inside handle (Anti panic release function)
Fire-proof
Outside force-lock function
Outside force-lock by passcode
Passcode Hide Auto close/Manual close setting function
Setting auto close/manual close by switch
Inside force-lock function
Inside force-lock by program
Others
Etiquette mode, high temperature alert, intrusion alert, passcode hide, prank prevention,
reset, master management, low battery alert, auto re-lock, door open alert
Safety Information
■ This section contains user safety information.
Please read carefully and use it properly.
If not followed, user can be dead or seriously injured.
warning
If not followed, user can be injured or property damage can be caused.
Caution
Parts
Motis
Installation manual,
User manual(1)
※Types and quantity of RF Tag and emergency key can be changed according to a
Ver.1.0
specification.
Do not remove
warning
▷ You should not remove any installed parts from the door.
If you need to do so for any reason, please contact service
center and consult.
▷ It can cause product malfunction or operation malfunction.
Do not spray water to the door lock or install
it where it is exposed to water or damp.
warning
▷ door lock is not water proof, thus water exposure can
cause malfunctioning.
Do not install where it is exposed to snow or rain.
Due to the extreme temperature difference of
indoor and outdoor, it can cause dampening the
Caution
door lock. Please use it after it dries.
▷ It can cause product malfunction or operation malfunction.
Make sure the door lock is properly installed
and read manual for proper functioning.
Caution
▷ It can cause product malfunction or operation malfunction.
Screw Set
RF Tag Battery
(4EA)
Remote Control Emergency key
Wireless Communication
Module (Optional Product)
(Optional Product) (2EA)
3
Components name
Outside
04
04
05
05
Start/End Button
06
RF Tag Reader
06
06
Key Hole
07
07
07
Inside
07
08
Battery Cover
08
08
08
Register button [S]
08
08
Low Battery
09
Status LED
09
09
09
10
10
10
10
11
Basic Functions
11
12 How to register passcode
12
s
1. Open battery cover and press register button [S].
2. Input the desired passcode.
Passcode can be set 4~13 digits.
3. Press button to complete the procedure.
You will hear buzzer melody from door lock.
■ When register mode is canceled, previous passcode is kept.
■ When more than 14 digits are entered, it will not be registered.
■ When less than 4 digits are entered, it will not be registered.
■ When a new set of passcode is registered, existing passcode is deleted.
■ While entering passcode, registration is canceled when there is no action for 60 seconds.
4
Basic Functions
How to register RF Tag
s
1. Open battery cover and press register button [S].
2. Place RF Tag on RF Tag reader.
You may register up to 50 RF Tags.
Repeat the process consecutively if you have more RF Tags to register.
3. Press register button [S] to complete the procedure.
■ When registration mode is canceled, existing RF Tag is kept.
■ When 50 consecutive tags are registered, registration is completed automatically.
■ When error occurs during the process, start over by pressing register button.
■ Registration is canceled when there is no action for 60 seconds.
■ You can not register the same RF Tag twice.
■ When a new RF Tag registered, existing RF Tag is deleted.
How to delete RF Tag
s
1. Open battery cover and press register button [S].
2. Press 0 button on the keypad.
3. Press register button [S] to complete.
■ If lost RF Tag, register new RF Tag after deleting all existing RF Tag information in system.
■ When canceled, existing RF Tag is kept.
■ Delete mode is canceled when there is no action for 60 seconds.
How to open door from inside
OR
1. Press down the inside handle to open while locked.
2. Turning the manual open/close lever to open position while locked.
■ Auto lock is activated when the door is not opened within 7 seconds.
■ When outside force-lock is set, opening the door will set off intrusion buzzer alarm.
■ When Prank Prevention function is set, Prank Prevention function is deactivated.
5
Keypad
Reset Button
Out Handle
Battery box
AA Alkaline batteries
1.5V 4EA
Auto/Manual Setting Switch
s
Open/Close Button
(Inside double lock button)
In handle
6
s
s