Logan F500-1 Instruction Manual

Instruction Manual

P I C T U R E F R A M I N G
Dual-Drive
Point driver
FOR SUCCESSFUL OPERATION USE
ONLY AUTHENTIC LOGAN POINTS
MODEL F53, F54, F55 or F56
Identification
Point Loading
Cartridge
Nose
50 Flexible
Adjusting Tension
+
Increase or Decrease Tension for Point Insertion as Needed.
For example, you may need to increase tension when driving
into hardwood.
Warranty
Logan Graphic Products, Inc. ("Logan") warrants the Dual-Drive Point Driver - Model F500-1, to be free from defects in parts and workmanship for a period of one year from the
date of original purchase. Logan warrants that it will either repair or replace, at it's sole discretion, any necessary replacement parts found to be defective. Should the product
need to be returned to Logan for repair or replacement parts, authorization for any return must come from Logan in writing. Costs of returning the product to Logan, including
insurances, shall be borne by the purchaser. Logan shall not be liable for any damages or losses, incidental or consequential, direct or indirect, arising from the use of this
product. This warranty extends only to the original purchaser and is not assignable or transferable. This warranty is in lieu of all other warranties, expressed or implied.
Rev. 3/07
Release for Point
Loading Cartridge
Trigger
Tension
Adjustment
50 Rigid
-
The Logan Dual Drive Point Driver can be used to insert both
Flexible and Rigid Points making this a very adaptable point driver.
For best results push the 'Nose' up to the inside of the picture
frame and squeeze the 'Trigger'. You may want to hold the
outside edge of the picture frame to absorb some of the
movement from the point insertion. It is advisable not to angle the
Dual Drive Point Driver 'Downwards' as this may cause
"Pinching" of the materials within the picture frame and result in a
'Wrinkled' appearance.
Adjust tension when driving into various types of wood, for
example, you may want to increase the tension if you are driving
into a hardwood frame etc.
Logan Graphic Products offers both the Flexible and Rigid Points
in 600 count and 2500 count, available at most fine art stores.
Loading Points
Load Points
Model F500-1
www.logangraphic.com
Pull Back & Up to
Open Cartridge
Logan Graphic Products Inc.,
1100 Brown Street, Wauconda, IL 60084 USA
Toll Free 1 800 331 6232
www.logangraphic.com
Reference Part No. L0166