Motorola MM1000 Quick Start Manuals page 10

When installing the PoE Filter, you'll do the following:
1. Check that nobody in your home is watching TV or using
the Internet, because you will interrupt them.
2. Disconnect the coax cable as near as possible to where it
comes into your home. This is usually inside your home,
but may be outside your home. Sometimes the coax cable
goes into a splitter, and sometimes it connects to
something else.
3. Connect that same coax cable to one end of the PoE
Filter.
4. Connect the other end of the PoE Filter to the coax
connector where you disconnected the coax cable.
Figure 4. Connecting a PoE Filter
9