Download Print this page

Lencarta UltraPro Commander Instructions

Designed for use with the lencarta ultrapro 300 and ultrapro 600

Table of Contents

Download this manual

Many thanks for purchasing our UltraPro Commander, the remote controller designed for use with the

Lencarta UltraPro 300 and UltraPro 600 flash heads.

Batteries

Open the battery holder and insert 2 x AAA

alkaline batteries.

When you switch on the unit it will carry out a

self diagnosis check, which takes approximately

6 seconds, and will then enter the operation

mode automatically. Alternatively, pressing the

OK button will enter the unit into the operation

mode immediately.

The unit should be switched off when not required, it does not switch off automatically.

The Commander is a fully featured remote

control. It can control all functions of our

UltraPro flash heads, and can also control up to

10 flash heads in up to 10 separate groups, at a

distance of up to 100 metres.

Table of Contents

Do you have a question about the UltraPro Commander and is the answer not in the manual?

Page 1 Many thanks for purchasing our UltraPro Commander, the remote controller designed for use with the Lencarta UltraPro 300 and UltraPro 600 flash heads. The Commander is a fully featured remote control. It can control all functions of our UltraPro flash heads, and can also control up to 10 flash heads in up to 10 separate groups, at a distance of up to 100 metres.
Page 2 Flash head and group identity ID:1 (on the display above) shows that you have assigned the flash head to identity 1 and that you have assigned that flash head into group 2. You can set separate identities to up to 10 flash heads in each group, this allows you to control up to 100 flash heads, each with individual settings.
Page 3 Move the cursor to the flash symbol and then press the "Down" button. All Lencarta products are fully compliant with both ROHS and EU standards and have been issued with the necessary certificates. We are also fully compliant with WEE Regulations and are happy to accept any Lencarta electrical products for recycling, once they have reached the end of their useful life.