1. Manuals
  2. Brands
  3. Atlona Manuals
  4. Control Panel
  5. AT-ANC-108D
  6. Installation manual

Atlona AT-ANC-108D Installation Manual

8-button network control panel
Hide thumbs Also See for AT-ANC-108D:
Table of Contents

Advertisement

Quick Links

Download this manual
8-Button Network Control Panel
AT-ANC-108D
The Atlona AT-ANC-108D is an 8-button network control panel for Atlona IP-based single output
channel switchers. It is designed for easy configuration using the free Atlona Management Sys-
tem (AMS) software resource. The ANC-108D only requires a single category cable, from a PoE-
equipped network switch, to deliver both control signal and power, and provide fast, hassle-free
installation. Configuration is also fast. Simply download a configuration file from within AMS for
Atlona single output switchers such as the HDVS-200 Series, HDVS-300 Kit, SW Series, AT-UHD-
CLSO-601, or AT-UHD-CLSO-612ED.
Combined with Atlona IP-controllable switching products for huddle spaces, classrooms and
conference rooms, the network control panel acts as a remote control to send IP commands
to the switcher. The switcher in turns acts on those commands or translates the IP commands
into RS-232 commands to control external devices such as displays to create a seamless AV
system. The ANC-108D fits into a US one-gang junction box and is compatible with Decora-style
wallplates.

Package Contents

1 x AT-ANC-108D
1 x White Decora faceplate
1 x Blank button template
1 x Pre-defined button template
1 x Installation Guide
IMPORTANT: Visit http://www.atlona.com/product/AT-ANC-108D for the latest firmware
updates and Installation Guide.
1

Installation Guide

AT-ANC-108D

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AT-ANC-108D and is the answer not in the manual?

Questions and answers

Related Manuals for Atlona AT-ANC-108D

Summary of Contents for Atlona AT-ANC-108D

  • Page 1: Installation Guide

    8-Button Network Control Panel AT-ANC-108D The Atlona AT-ANC-108D is an 8-button network control panel for Atlona IP-based single output channel switchers. It is designed for easy configuration using the free Atlona Management Sys- tem (AMS) software resource. The ANC-108D only requires a single category cable, from a PoE- equipped network switch, to deliver both control signal and power, and provide fast, hassle-free installation.

  • Page 2: Panel Descriptions

    This set of eight programmable push buttons can be defined using AMS. Mini-USB This port is used to updated the unit, manually. The preferred and recommended method for updating the AT-ANC-108D is AMS. Reset Button Press this button to reset the unit. Refer to Resetting to Factory-Defaults (page 4) more information.

  • Page 3: Power Connector

    IMPORTANT: Stranded or patch cable is not recommended due to performance issues. Shielded cables are strongly recommended to minimize signal noise and interference. 2. Complete the installation of the AT-ANC-108D into the electrical box or mud ring. Refer to the Wallplate Installation (page 5), if necessary.

  • Page 4: Resetting To Factory Defaults

    (if available), will automatically assign an IP address to the unit. AMS is recommended to configure IP settings of the AT-ANC-180D.If a static IP address is desired, the unit can be switched to static IP mode. The default static IP address of the AT-ANC-108D is 192.168.1.50. AMS 2.0 For easy configuration of Atlona devices, AMS 2.0 is available from https://atlona.com/ams for...

  • Page 5: Wallplate Installation

    Install the mud ring/electrical box (not shown in illustration) as required, then attach the AT- ANC-108D to the mud ring/electrical box assembly. Connect the HDBaseT cable to the LAN port on the rear of the AT-ANC-108D. Install the AT-ANC-108D into the mud ring/electrical box, using the two included screws and secure it in place with a regular screwdriver.

  • Page 6: Button Mapping

    Button 1 AT-ANC-108D DC 5V Button 8 To map a device to the AT-ANC-108D, do the following. Refer to the 8-Button Network Control Panel User Manual for more information. Login to AMS. Click CONFIGURATION in the menu bar. Click the Device Type drop-down list and select the device to be mapped to the AT-ANC- 108D.
  • Page 7 The IP address of the device will also be listed next to the model name. Click the UPLOAD button to upload the configuration file to the AT-ANC-108D. The Button Mapping section will be configured for the selected device. The example below, shows the AT-UHD-CLSO-612ED mapped to the AT-ANC-108D.
  • Page 8 • © 2018 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice. Actual products, product images, and...

Table of Contents