Table Of Contents; Safety Lnstructions For Dust Collector Kit; Safety Signal Words; Before Using The Table Saw Dust Collector Kit - RIDGID AC1098 Owner's Manual

Table of Contents
Section Page
Table of Contents .................................. 2
Safety lnstructions For
Dust Collector Kit ................... : ........... 2
Safety Signal Words ............................ 2
Before Using the Table Saw Dust
Collector Kit ........................................ 2
When lnstalling Dust Collector Kit Or
Moving The Tool ................................ 3
To Reduce the Risk of lnjury From Jams,
Slips Or Thrown Pieces (Kickbacks
Or Throwbacks) .................................. 3
Section Page
Plan Ahead To Protect Your Eyes,
Hands, Face and Ears ....................... 3
Whenever Tool Is Running .................. 4
lntroduction ............................................ 4
Unpacking and Checking Contents ....... 5
Table of Loose Parts ........................... 5
Loose Parts ......................................... 5
lnstallation for 10" Belt Drive Table Saw .. 6
Safety lnstructions For Dust Collector
Kit~
Safety is a combination of common sense, staying alert and knowing how your acces-
sory works. Read this manual to understand the accessory.
Safety Signal Words
DANGER: means ifthe safety information
is not followed someone will be seriously
injured or killed.
WARNING: means if the safety informa-
tion is not followed someone could be
seriously injured or killed.
CAUTION: means if the safety informa-
tion is not followed someone may be
injured.
Before Using the Table Saw Dust Collector Kit
WARNING: For your own safety,
read and understand the saw, vac
and sawdust collector owr.iers man-
ual and affixed warnings before
operation.
1. Read and understand safety instructions
on pages 2, 3 and 4 of this manual.
2. Before attempting to remove a block-
age in the collector, read and follow the
Collector
Door
2
instruction/warning on the collector
housing door.
3. Do not cut or sand metal or other spark
producing workpieces with Table Saw
Dust Collector in place. To avoid fire,
remove collector and all sawdust
before beginning any spark producing
operation.